Camp Chef Pellet Grill Accessories: Covers, Probes and Drip Trays

No. 1 of 6 · Utheer

Utheer Pellet Grill Cover for Camp for 24-Inch Smokers

9.2/10 Our score

Best for: Woodwind Pro WiFi 36 grill owners

Pros

• Reinforced corner panels
• Tailored 62-inch full-body coverage
• Tear-resistant double stitching

Cons

• Exclusively fits Woodwind Pro 36

Best for: High-wind patios and chimney-vented smokers

Pros

• Heavy-duty side hook-and-loop straps
• Formed chimney and shelf contour
• Precision two-thread stitching

Cons

• Not compatible with Sidekick modules

Best for: Owners of 24-inch Camp Chef grills

Pros

• 600D polyester oxford fabric
• Reflective safety locator tape
• Adjustable bottom drawstring

Cons

• Will not fit Sidekick attachments

Outdoor cooks who leave their smoker exposed to coastal moisture, intense mountain sun, or seasonal snowfall need a rugged exterior barrier that will not tear at the seams. The Utheer Pellet Grill Cover for Camp is tailored to fit an expansive lineup of 24-inch cooking chambers, including the Camp Chef SmokePro DLX, PG24XT, PG24, PG24SG, PG24B, PG24LS, PG24S, PG24SE, and PG24LTD models. It also covers the Woodwind WiFi 24 and SmokePro ZG series, provided your cooker does not have an attached side burner shelf. Built from upgraded 600D fade-resistant polyester oxford fabric backed by an internal PVC liner, this heavy-duty camp chef smokepro cover resists rain, blowing dust, harsh sunlight, and winter snow accumulations.

Beyond baseline weatherproofing, the design incorporates practical travel and camp-friendly enhancements. The exterior features high-visibility reflective tape engineered to let you spot your cooker within 300 meters in low-light environments, an invaluable perk when managing late-night brisket sessions at crowded tailgates or unlit campsites. Heavy-duty fabric side handles make pulling the cover over the chimney and hopper effortless, while also doubling as hanging loops for off-ground storage during active cooks. When blustery weather rolls in, integrated bottom drawstring straps allow you to cinch away slack fabric, locking the hem against the legs so gusty winds cannot dislodge the material.

This cover is ideal for owners of standard 24-inch cookers who prioritize storm defense and nighttime visibility in outdoor environments. Its smooth fabric surface cleans quickly by wiping it down or rinsing it off with a garden hose. However, cooks running specialized side attachments must note that this model specifically accommodates standalone smokers without the Sidekick module installed, leaving larger setups to seek wider dimensional configurations.

See it on Amazon

No. 2 of 6 · Glowye

Drip Tray Heat Baffle for Camp for Internal Grease Management

8.0/10 Our score

Best for: Replacing worn 24-inch grease heat baffles

Pros

• Durable stainless steel construction
• Angled grease drainage channel
• Simple two-step installation

Cons

• Weighs nearly six pounds

Managing fat runoff and even chamber heat is essential for preventing grease flare-ups during long roasting sessions. The Drip Tray Heat Baffle for Camp serves as a direct internal replacement part designed specifically for Camp Chef 24 Series pellet cookers. The manufacturer lists compatibility across Woodwind WiFi 24, Woodwind Classic 24, Woodwind SG 24, SmokePro SG 24, SmokePro STX 24, and SmokePro XT 24, as well as replacement part numbers PG24SE, PG24STX, PG24XT, PG24, PG24WWS, and PG24SG-4. Much like the grease distribution plates engineered for a traeger pellet grill, this plate sits directly over the burn grate to shield flames and redirect liquefying fats away from the central firepot.

Constructed entirely of solid stainless steel, this camp chef drip tray replacement measures 15 1/2 inches wide by 20 1/2 inches long by 3 1/2 inches high, while the overall packaging specifications list dimensions of 21 by 15 by 3 inches at an operating weight of 5.89 pounds. The heavy-gauge stainless steel build resists both rust and extreme heat deformation over prolonged cooking cycles. Functionally, the tray features inward-angled surfaces and a dedicated central channel that efficiently guides melting fat toward the drain port, minimizing grease pooling inside the cookbox. The manufacturer also highlights compatibility with various Traeger systems, replacing Traeger part numbers BCA070 and BAC012 across Pro 575 and 20 or 22 series units.

This replacement baffle is best suited for backyard chefs experiencing corrosion, flaking metal, or warping on their original factory drip shield. Installation requires zero drilling thanks to a simple two-step drop-in design that seats directly into the cooker’s internal support brackets. While its nearly six-pound stainless steel weight adds a slight heft during routine chamber scrubbing, that density ensures structural longevity under repetitive high-heat smoking conditions.

See it on Amazon

No. 3 of 6 · Fccum

2 Pack High Temperature Meat Probe for Basic Grilling Monitors

8.0/10 Our score

Best for: Smoker owners needing backup temperature probes

Pros

• Includes two stainless steel clips
• ETL specification met
• Stainless steel exterior

Cons

• Hand wash only cleaning required

Accurate internal protein monitoring makes the difference between succulent barbecue and dried-out brisket, especially when cooking outdoors in shifting ambient weather. The 2 Pack High Temperature Meat Probe set offers direct replacement capability for standard Camp Chef wood pellet units. Engineered to replace original equipment manufacturer components, this dual-probe kit supports factory controllers on models PG24, PG24B, PG24LS, PG24S, PG24SE, PG24LTD, PG24WWS, and PG24WWSS. By providing two dedicated leads, it lets you monitor multiple cuts of pork butt or poultry simultaneously without opening the main chamber lid.

The technical specifications indicate a stainless steel outer build that satisfies ETL safety standards for food preparation hardware. The listing indicates an analog display type alongside high accuracy tuning, with an operating temperature window running from a lower range of 120°C up to an upper heat ceiling of 300°C. In addition to the two metal sensing probes, the package includes two stainless steel BBQ clips designed to anchor the probes securely to the cooking grates, allowing them to measure ambient grate temperature accurately if not inserted into meat. Routine maintenance is straightforward: the tips can be placed under running sink water or cleaned thoroughly with a damp washcloth, though hand washing is required to protect the internal electrical leads.

This two-pack serves pitmasters seeking straightforward, reliable backup sensors for their digital control board. It eliminates the guesswork during overnight cooks by ensuring steady communication with the grill’s temperature readouts. Because the listing specifies hand wash maintenance only, users must avoid complete water immersion of the wire joints to keep the stainless steel probes operating accurately season after season.

See it on Amazon

No. 4 of 6 · Bezmaksas

2-Pack Repalcement Meat Probe for Camp for High-Heat Monitoring

8.4/10 Our score

Best for: High-heat cooks wanting silicone handle sleeves

Pros

• Endures heat up to 1000°F
• Protective silicone handle sleeves
• Standard 3.5mm plug interface

Cons

• Limited to hand wash maintenance

When cooking high-temperature roasts or searing cuts at the upper limits of your pellet cooker, sensor durability becomes vital. The 2-Pack Repalcement Meat Probe for Camp expands operational safety by incorporating heat-shielded silicone handles onto its sensing needles. Built for broad system versatility, this camp chef meat probe replacement package matches the controller ports of Camp Chef PG24, PG24B, PG24LS, PG24S, PG24SE, PG24LTD, PG24WWS, PG24WWSS, DLX, Cabelas, and Woodwind models. Each probe connects via a standard 3.5mm plug interface, providing true plug-and-play functionality with the smoker’s native control panel.

The structural engineering on this kit is targeted directly at heat resistance and tactile handling. The probe itself is rated to endure sustained temperatures up to 1000°F (500°C), while the flexible stainless steel braided cable withstands heat exposures up to 718°F (380°C). Over the back of the probe, an enhanced silicone sleeve offers a non-slip grip that remains heat-resistant up to 392°F (200°C), protecting fingers from accidental burns when adjusting probes inside a steaming grill barrel. The listing notes a digital display style configuration with battery-powered operation in its technical data, an immersion depth of 5.3 inches for thick cuts, and includes two metal probe clips to anchor the shafts directly onto the food grates.

This dual kit suits serious pitmasters who frequently tackle heavy smoking loads and require high-heat resilience. The waterproof tip construction simplifies grease cleanup after extended cooks, requiring only a quick wipe or gentle hand wash. The rugged braided cable and insulated silicone grips make it a substantial upgrade for cooks who dislike handling slippery, bare-metal probe shafts near smoking grates.

See it on Amazon

No. 5 of 6 · Supjoyes

Grill Cover for Camp Chef DLX for Wind-Resistant Chimney Shelving Fit

8.0/10 Our score

Leaving a pellet cooker on an open patio leaves electrical components, hopper seals, and steel finishes vulnerable to moisture damage. The Grill Cover for Camp Chef DLX is custom-patterned to provide snug, formed protection over 24-inch smokers fitted with side preparation shelves and vertical smoke chimneys. It delivers form-fitting dimensions tailored specifically for Camp Chef models PG24, PG24B, PG24LS, PG24S, PG24SE, PG24LTD, PG24WWS, PG24WWSS, SG24, and SmokePro DLX 24 units. Fabricated similarly to a heavy pit boss pellet grill smoker cover, this shield uses upgraded 600D polyester oxford fabric laminated with a waterproof PVC backing to repel rain, blowing snow, and UV radiation.

High-stress outdoor storage requires resilient stitching, and this model features precision two-thread double stitching across its main seams to minimize abrasive fraying and prevent tearing over repeated use. To combat sudden gusts of wind that can whip loose covers off patios, SUPJOYES integrates two heavy-duty hook-and-loop fastening straps on the lower flanks. Cinching these Velcro bands tight keeps the cover securely anchored around the smoker’s legs and lower storage rack. Sturdy fabric handles positioned across the upper surface allow users to lift the tailored chimney pocket on and off the smoker without snagging, while an included storage bag keeps the folded polyester neat when the grill is fired up.

This protective shield is the ideal choice for SmokePro DLX and SG24 owners whose cookers feature the standard side shelf and top-mounted smoke stack. The tailored chimney envelope prevents water from pooling on top of the exhaust cap. Buyers must remember that the listing explicitly notes this cover will not fit smokers outfitted with an auxiliary Sidekick attachment, making it strictly suited for factory shelf configurations.

See it on Amazon

No. 6 of 6 · Utheer

Utheer Pellet Grill Cover for Camp for Large Woodwind 36 Installations

9.4/10 Our score

Large-format pellet grills require purpose-built covers that can drape cleanly over broad cookboxes without stretching thin across the corners. The Utheer Pellet Grill Cover for Camp is engineered exclusively for the flagship Camp Chef Woodwind Pro WiFi 36 smoker. Unlike universal, baggy wraps that billow in the wind, this camp chef woodwind cover features precision-cut patterning that measures 62 inches in length, 26 inches in width, and 44.5 inches in height. This exact dimensional profile delivers full-length protection from the top of the cooking hood all the way down to the caster wheels.

The cover is crafted from heavy-duty 600D fade-resistant Oxford fabric backed by a waterproof internal lining to block outdoor moisture, windblown dust, fallen leaves, and winter precipitation. High-stress points and sharp sheet-metal edges are common failure zones on large covers, so Utheer reinforces these vulnerable spots with double-stitched seams and reinforced corner panels. To ensure the 62-inch skirt remains planted during heavy patio squalls, the bottom hem features an integrated drawstring system that cinches the lower perimeter tightly around the grill’s legs.

This model is built specifically for backyard cooks who own the massive Woodwind Pro 36 platform and want an exact, clean-fitting aesthetic. The smooth external fabric texture sheds dirt and soot easily, needing only a rinse with a garden hose and sun drying between uses. Because it is engineered exclusively for the Woodwind Pro WiFi 36, owners of 24-inch or non-Pro units should bypass this cover in favor of smaller, model-specific options.

See it on Amazon