3 models in this file
Troy-Bilt Snow Blower Add-Ons: Skid Shoes, Cab and a Blower
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Troy-Bilt has established a long-standing reputation in the outdoor power equipment space for rugged, dependable two-stage snow machines capable of chewing through compacted drifts and icy roadside berms. Homeowners and rural property managers often seek out a troy bill snow blower setup because the brand emphasizes sturdy steel augers, solid gearboxes, and straightforward mechanical layouts designed to withstand severe winter conditions year after year. When dealing with heavy lake-effect storms or prolonged sub-zero temperatures, keeping these winter machines properly configured with functional replacement hardware and ergonomic upgrades makes the difference between grueling manual labor and swift snow management.
While a primary walk-behind machine handles the bulk of heavy driveway clearing, the supplemental gear in this lineup addresses three distinct operational needs: replaceable slide shoes preserve your auger housing height, a universal weather cab isolates the operator from freezing blowback, and a handheld gas blower tackles fine powder on porches, vehicles, and entryways where large machinery cannot tread.
The line-up at a glance
Troy-Bilt Snow Blower Parts and Accessories Compared
| Model | Primary Function | Key Compatibility or Engine | Included Components |
|---|---|---|---|
| CheeMuii 784-5580 784-5580-0637 Skid Shoe | Auger housing height adjustment and ground wear protection | MTD and Troy-Bilt Storm series 2410 through 5524 | 2 skid shoes, 4 bolts, 4 washers, 4 lock nuts |
| Arnold 490-241-0032 Univ Snow Thrower Cab | Operator wind, freeze, and blowback shelter | Medium and large two-stage and three-stage snow blowers | Tubular frame, fabric cab, clear vinyl, storage pouch |
| Troy-Bilt Gas Leaf Blower | Light snow and debris clearing for tight spots | 25cc 2-cycle gas engine with SpringAssist | TB400 leaf blower, 2-cycle engine oil |
No. 1 of 3 · Chee Muii
CheeMuii 784-5580 784-5580-0637 Skid Shoe for Driveway Surface Protection
8.6/10 Our score
Best for: Driveway gravel clearance and scraping protection
What the listing says
- PACKAGE Including 2 pcs snowblower skid shoes, 4 pcs bolts, 4 pcs washers, 4 pcs lock nuts.You…
- MATERIAL It is made of high-quality metal,won't break and rust proof and wear-resistant
- ADJUSTABLE You can adjust the skid shoes depending on the depth of cleaning length 4 3/4", 2…
- Replacement Part Number Replace for MTD 784-5580, 784-5580-0637, 784-5580-0638, 784-5580-0662, 784-5580-0665, 784-5580-0688
- FITMENT COMPATIBILITY Fit for most two-stage snow thrower, fit for MTD 2-stage snow thrower models 1992-Up with MTD…
- COMPATIBLE MODELS Compatible with MTD White Snow Boss 500, Snow Boss 750, Snow Boss 800, Snow Boss 850,…
Pros
- Includes bolts, washers, and lock nuts
- Adjustable 2.75-inch center-to-center mounting slots
- Rust-resistant heavy-duty metal frame
Cons
- Limited to specific 2.75-inch bolt spacing
Maintaining proper ground clearance is essential when guiding a heavy two-stage machine across uneven asphalt, cracked concrete, or decorative pavers. The CheeMuii 784-5580 784-5580-0637 Skid Shoe is an aftermarket replacement set engineered to replace original MTD part numbers 784-5580, 784-5580-0637, 784-5580-0638, 784-5580-0662, 784-5580-0665, and 784-5580-0688. Built with a metal and nylon construction, these snow blower slide plate shoes absorb constant friction against abrasive ground surfaces, preventing the auger bucket and expensive bottom scraper bar from catching on pavement lips or gouging into turf during mid-winter operations.
Each shoe measures 4 3/4 inches in total length with slotted mounting holes spaced 2 3/4 inches center-to-center, providing variable height settings depending on the depth of cleaning you require. The package ships as a complete two-pack containing four bolts, four washers, and four lock nuts, eliminating the hassle of sourcing specialized hardware when performing pre-season maintenance. Compatibility covers a broad spectrum of equipment, including MTD two-stage snow throwers from 1992 and onward with 24-inch blowers, MTD Yard Machine units, and popular Troy-Bilt Storm models such as the Storm 2410, 2420, 2620, 2625, 2690, 2840, 5024, and 5524. Unlike compact single-stage machines like a powersmart electric snow blower that ride directly on scraper paddles, these heavy-duty shoes let you elevate the intake box safely over gravel driveways to prevent chucking loose stones through the discharge chute.
This hardware kit best suits homeowners whose current factory slide plates have thinned down to sharp edges or suffered rust perforation from winter road salts. Because the kit includes all required fasteners, it offers an immediate, direct replacement without workshop modifications. However, if your machine utilizes non-standard bolt spacing different from the 2 3/4-inch slot layout, you will need to check your existing bracket dimensions before bolting these on.
No. 2 of 3 · Arnold
Arnold 490-241-0032 Univ Snow Thrower Cab for Winter Weather Protection
9.0/10 Our score
Best for: Sub-zero blizzard wind and snow protection
What the listing says
- COMPATIBLE SNOW BLOWERS Fits Cub Cadet, Troy-Bilt, Craftsman, Yard Machines, Ariens, Toro, Husqvarna, Brute, John Deere and most medium…
- DURABLE AND RELIABLE Solid protection from the wind, snow and cold and strong powder-coated steel tubular frame
- TEAR RESISTANT Durable clear vinyl and heavy duty tear-resistant fabric that is also reflective for safety
- SPACIOUS Includes convenient storage pouch Interior has 360 degree visibility
- EASY TO INSTALL Installation and disassembling are seamless processes Cab extends approximately 42 inches above handle grips
Pros
- Heavy-duty tear-resistant reflective fabric
- Solid powder-coated steel tubular frame
- Full 360-degree interior visibility
Cons
- Adds 42 inches of overhead height
Operating outdoor power equipment in the middle of a swirling blizzard exposes the user to direct head winds, freezing moisture, and fine snow discharged straight back into the face. The Arnold 490-241-0032 Univ Snow Thrower Cab creates a protective canopy over the operator control station, using a strong powder-coated steel tubular frame paired with heavy-duty tear-resistant fabric and clear vinyl panels. This enclosure extends approximately 42 inches above the handle grips, creating an insulated pocket of calm air so you can work through blustery sub-zero conditions without suffering wind chill or ice-caked goggles.
The design delivers a full 360-degree interior visibility arc, allowing you to observe your chute direction, side curbs, and surrounding obstacles without blind spots. Reflective fabric accents increase visibility during early morning or evening clearing sessions when neighborhood street lighting is dim. According to the listing specifications, the cab is designed to handle snow conditions up to an ideal snow depth of 12 inches and fits medium to large two-stage and three-stage snow blowers from brands including Troy-Bilt, Cub Cadet, Craftsman, Yard Machines, Ariens, Toro, Husqvarna, Brute, and John Deere. Specific Troy-Bilt Yard-Machines model fitments include the 45, 2600, 12533GC, 60024PC, 10528PC, and 90026PC series. The unit weighs 8.7 pounds and includes an integrated interior storage pouch to keep shear pins, spare gloves, or small hand tools within quick reach.
For anyone managing lengthy rural driveways or exposed paths where wind gusts turn snow clearing into a freezing endurance test, this snow thrower cab transforms the user experience. It provides far more continuous comfort than open-air shoveling or pushing a handheld tool like a snow blower shovel dewalt unit into driving sleet. The primary trade-off is vertical clearance: adding 42 inches of height above the operator handles requires adequate overhead clearance in your garage, shed, or trailer entryway during winter storage.
No. 3 of 3 · Troy-Bilt
Troy-Bilt Gas Leaf Blower for Quick Powder and Debris Clearance
8.0/10 Our score
Best for: Clearing dry powder from steps and cars
What the listing says
- Powered by a 25cc 2-cycle engine
- High volume air flow/velocity (400 CFM/180 MPH) for efficient clean up
- Variable speed throttle for greater control and ease of use
- Centralized controls for ease of use
- For clearing debris, including leaves, grass clippings, debris and pine needles
Pros
- Lightweight 12.2-pound handheld design
- SpringAssist technology for easier pull starts
- High airflow up to 400 CFM and 180 MPH
Cons
- Requires mixing 2-cycle gas and oil
While two-stage snow blowers excel at carving through deep snowbanks across open driveways, they are too cumbersome and heavy to lift onto raised timber decks, vehicle windshields, or narrow front steps. The Troy-Bilt Gas Leaf Blower, designated as model TB400, steps in as an agile clearing companion powered by a 25cc 2-cycle gas engine. Delivering an air velocity up to 180 miles per hour with an air volume of 400 cubic feet per minute, this handheld unit quickly sweeps away fresh, light powder from delicate surfaces where steel auger blades would cause gouges.
The TB400 features SpringAssist starting technology, engineered to reduce pull-cord resistance for smoother ignition during chilly mornings. Centralized controls and a variable speed throttle give you precise command over the engine output, letting you dial back the air stream near fragile landscape beds or unleash the full 400 CFM to dislodge wet snow packed around automobile wheels and entryway boot scrapers. Weighing 12.2 pounds, the red handheld unit comes complete with an initial container of 2-cycle engine oil to assist with your fuel mix preparation right out of the box.
This handheld blower suits homeowners seeking a year-round utility tool capable of clearing autumn leaves, grass clippings, and pine needles before serving as a winter powder broom. While property owners who prefer zero engine maintenance might investigate a black and decker cordless snow blower alternative, this gas-powered unit delivers continuous blowing capacity without runtime limits dictated by freezing lithium batteries. Keep in mind that a 25cc 2-cycle engine requires manual fuel mixing and is suited strictly for light, dry powder rather than slush or hard-packed ice.
Before you choose
How to Choose the Right Troy-Bilt Snow Blower Parts and Accessories
Selecting appropriate add-ons for your winter setup requires analyzing your property layout, your local weather conditions, and the mechanical requirements of your walk-behind machine. The equipment highlighted in this troy-bilt snow blower comparison addresses entirely different facets of storm management, ranging from mechanical wear prevention to physical operator shelter and supplemental blowing power.
- Ground Clearance and Surface Type: If your clearing route includes coarse gravel, uneven flagstone, or broken asphalt, maintaining fresh troy bilt skid shoes is critical. Skid plates elevate the scraper blade above surface irregularities, ensuring you do not collect crushed rock into the impeller housing. For smooth sealed concrete, setting the shoes lower allows for a tight, pavement-scraping finish. Inspect your factory plates annually for thinning metal, as worn-through shoes will quickly destroy the lower housing of your machine.
- Severe Weather and Wind Protection: If you frequently clear snow in open fields or coastal areas subject to heavy winds, a snow thrower cab is an essential ergonomic addition. It isolates you from sub-zero drafts and freezing face spray without inhibiting your field of view. Before ordering, verify that your storage space has at least 42 inches of clear height above the machine’s handlebars to accommodate the tubular frame when parked.
- Supplementary Clearing Needs: A primary two-stage snow thrower cannot clean off the hood of an SUV, clear tight staircase treads, or navigate around porch patio furniture. Adding the troy-bilt tb400 leaf blower gives you an agile tool for blowing light powder off vehicles and porch steps in seconds, keeping your primary machine focused on broad pavement runs.
- Mounting Dimensions and Fitment Confirmation: When determining which parts fit troy-bilt snow blower models, always check center-to-center hole measurements. The CheeMuii slide shoes use a 2 3/4-inch slot layout designed for standard MTD 24-inch auger housings and Storm series machines, while the Arnold cab utilizes universal clamps that mount across tubular handle frames on medium and large two-stage models.
By pairing the right mechanical protection on your auger housing with targeted operator comfort accessories and portable blowing gear, you build a comprehensive winter maintenance system that keeps both machine and operator performing reliably across the harshest winter weather.
Questions people ask
FAQ
Which parts fit troy-bilt snow blower models in the Storm series?
The CheeMuii skid shoe set explicitly fits Troy-Bilt Storm series models including the 2410, 2420, 2620, 2625, 2690, 2840, 5024, and 5524, as well as MTD Yard Machine units sharing the 784-5580 part numbers. The Arnold universal cab fits medium and large two-stage and three-stage Troy-Bilt snow blowers, including specific models like the 45, 2600, 12533GC, 60024PC, 10528PC, and 90026PC. Always measure your bolt spacing and handle frame dimensions to verify physical compatibility before purchasing.
How do troy bilt skid shoes protect the auger housing from pavement contact?
Skid shoes bolt directly to the outer left and right sides of the auger housing bucket. By adjusting their vertical position along the mounting slots, you dictate how close the bottom scraper bar sits to the ground. This prevents the spinning steel auger blades and bucket structure from directly grinding against concrete, catching on uneven expansion joints, or scooping loose gravel from unpaved driveways.
Can a snow thrower cab stay mounted during storage and transport?
The Arnold cab features a tubular frame that extends approximately 42 inches above the handle grips. It can remain mounted on the machine during storage provided your garage, shed, or vehicle trailer has sufficient vertical ceiling clearance. If overhead space is limited, the listing indicates that installation and disassembling are seamless processes, allowing you to remove the upper assembly as needed.
Why use a gas leaf blower alongside a two-stage snow thrower?
A heavy two-stage snow blower is built for high-volume driveway clearing but cannot access elevated wooden decks, narrow porch steps, or vehicle surfaces. A handheld tool like the Troy-Bilt TB400 provides 400 CFM of airflow at 180 MPH, making it ideal for quickly blasting away dry, powdery snow from delicate areas without risking mechanical damage from heavy metal augers.
What mounting hardware is required when replacing snow blower slide plate shoes?
The CheeMuii skid shoe package includes all necessary installation hardware: two skid shoes, four bolts, four washers, and four lock nuts. Because standard hardware store fasteners can vibrate loose under the intense oscillations of a two-stage engine, the included lock nuts ensure the shoes remain firmly clamped at your desired cleaning depth throughout heavy snow operations.
Prices, specifications and the feature lines above are read from the product listing and can change without notice. Scores are out of 10, based on listed specifications and buyer feedback; nothing on this page is written from handling the product.
