6 models in this file
Murray Riding Mower Parts Guide: Belts, Carbs and More
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Murray riding lawn mowers have earned a reputation over decades for straightforward utility, dependable cutting mechanisms, and long-lasting mechanical platforms. Many homeowners maintain older Murray tractors across multiple seasons because their chassis, cutting decks, and drive assemblies are built with accessible, serviceable components. Keeping these machines operating smoothly throughout the cutting season often comes down to sourcing the correct murray riding lawn mower parts, whether you are tackling routine seasonal tune-ups, fixing wear-and-tear items, or tracking down specific murray mower repair parts after unexpected mechanical downtime.
The six replacement parts featured in this guide address distinct mechanical and electrical sub-assemblies on your tractor, ranging from an electrical key switch and a dedicated fuel carburetor to a heavy-duty front wheel bearing kit, two application-specific cutting deck V-belts, and a molded gasoline storage tank.
The line-up at a glance
Murray Riding Mower Parts Compared
| Part Name | Component Type | Replaces OEM Part Numbers | Intended Murray Fit | Key Specification |
|---|---|---|---|---|
| BlueStars 725-1717 925-1717 Ignition Starter Switch | Ignition starter switch | 725-1717, 925-1717, 092556, 092556MA, 92556, 92556MA | Compatible Murray riding tractors | 4 positions, 7 terminals, aluminum alloy housing |
| M115-38 Carburetor for Murray Riding lawn | Carburetor assembly | 13AC77LF058, M115-38 | Murray M115-38 with 13AC77LF058 engine | Direct-fit carburetor, 365-day warranty |
| DEEG 4PCS 9040H Lawn Mower Front | Wheel bearing conversion kit | 532009040, 532124959, 9040H, F202 | Murray tractors with 34.925mm rim bore | 14-piece set, 2 flange bearings, 19.05mm axle size |
| Riding Lawn Mower Deck Belt 1 | Cutter deck V-belt | 037X88, 037X88MA, 37X88, 37X88MA, 710213 | Murray 42-inch LT rail frames (1997 and newer) | 1/2-inch width by 89 1/4-inch length |
| Riding Lawn Mower Tractor Deck Belt | Cutter deck V-belt | 037X62, 037X62MA, 37X62, 37X62MA | Murray 40-inch deck tractors (1989 and newer) | 1/2-inch width by 86-inch length |
| 7601092MA 1.4 GAL Fuel Gas Tank | Gasoline fuel tank | 7601092, 7601092MA, 94073, 94073MA, 690294MA | Select Murray 38-inch, 40-inch, 42-inch tractors | 1.4-gallon capacity, includes matching cap |
No. 1 of 6 · Blue Stars
BlueStars 725-1717 925-1717 Ignition Starter Switch for Reliable Engine Starts
9.6/10 Our score
Best for: Owners fixing faulty mower ignition switches
What the listing says
- IMPORTANT NOTE Please check the measures and your engine's model carefully before purchasing to guarantee that you receive the correct part.
- WIDE COMPATIBILITY Replaces 725-1717, 925-1717, 140301, 532140301, 5412, 5412H, 5412K, 574455401, 092556, 092556MA, 92556, 92556MA, BS54124.
- RELIABLE IGNITION FOR ENGINE START-UP The 725-1717 Ignition Starter Switch is designed to control the starting and stopping of your Lawn…
- SUPERIOR MATERIAL Constructed with an aluminum alloy housing, this switch is built to handle tough outdoor conditions such…
- QUICK INSTALLATION Installing the Ignition Switch into the Lawn Mower/Tractor is easy for any DIY handyman and takes only 5 minutes.
- 100% LIFETIME PROTECTION Enjoy reliable performance with our lifetime protection, ensuring that your product will always be covered for…
Pros
- Durable aluminum alloy housing
- Corrosion resistant brass terminals
- Quick five minute installation
- Includes two physical keys
Cons
- Requires matching seven terminal pinout
The BlueStars 725-1717 925-1717 Ignition Starter Switch provides a direct electrical replacement for tractors struggling with intermittent cranking, broken key cylinders, or corroded internal contacts. Designed as a manual rotary switch, it features a 4-position layout paired with 7 screw-terminal connectors. This murray ignition switch is engineered to govern the starting and stopping cycles of the engine safely, ensuring that your electrical circuit engages properly every time you turn the key. The package includes two physical keys, giving owners an immediate working key alongside a spare for safekeeping.
Built for rugged outdoor use, the switch housing is constructed from aluminum alloy to handle tough conditions such as heat, moisture, dust, and continuous chassis vibration. Its brass-plated terminals offer corrosion resistance and strong conductivity, ensuring reliable electrical contact across the starting circuit. The listing specifies an easy five-minute installation for DIYers: disconnect the battery, disconnect the old switch, align the terminals, and snap the new rack-mount unit securely into place. Keeping your electrical system charged with an external battery tender for riding lawn mower storage during the off-season ensures this switch and the starter solenoid receive proper operating voltage.
This starter switch suits any homeowner whose Murray riding mower fails to turn over due to damaged dash terminals or a faulty key barrel. It directly replaces classic factory part numbers including 092556, 092556MA, 92556, and 92556MA, alongside cross-brand numbers like 725-1717 and 925-1717. However, if your starting issues are tied to fuel starvation or clogged engine jets rather than electrical switching, your focus should move to fuel delivery parts instead.
No. 2 of 6 · GkYt Cpa
M115-38 Carburetor for Murray Riding lawn for Engine Performance Tuning
8.0/10 Our score
Best for: Murray M115-38 riding mower engine tuning
What the listing says
- REPLACE PART NUMBERS Compatible with Murray M115-38 Riding Mower 13AC77LF058 Replacement Carb
- OPTIMIZED ENGINE OUTPUT Designed with premium materials, this carburetor enhances engine performance, delivering smoother acceleration and increased fuel efficiency…
- BUILT TO LAST Constructed from durable, high-quality materials, it’s engineered to handle tough conditions, ensuring long-lasting reliability and consistent…
- WORRY-FREE SHOPPING If you're not completely satisfied with your purchase, we'll make it right with a hassle-free return…
- INSTALLATION We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced.It's better…
Pros
- Restores smooth engine acceleration
- Complete direct fit assembly
- Includes 365 day quality warranty
Cons
- Professional installation recommended
The M115-38 Carburetor for Murray Riding lawn is a dedicated fuel-delivery component designed to restore smooth idle and consistent cutting power to engines that surge or stall under load. Tailored specifically for the Murray M115-38 riding mower powered by the 13AC77LF058 engine code, this part serves as a direct swap for the factory original. When stale gasoline deposits or ethanol varnish clog internal passages, installing a targeted murray carburetor replacement is often far more reliable than attempting a temporary rebuild.
Manufactured by GkYtCpa, this carburetor utilizes durable, premium materials engineered to withstand operating heat and constant fuel contact during long mowing sessions. The listing notes optimized engine output, delivering smoother acceleration and increased fuel efficiency under heavy cutting conditions. It comes as a single complete carburetor assembly backed by a 365-day quality warranty and a 30-day return policy. While the manufacturer recommends having the part installed by professionals, competent DIY owners can execute the swap by comparing the unit to the existing assembly, disconnecting the fuel line, and pairing the installation with a fresh lawn mower filter craftsman or engine-matched air element to prevent immediate particulate contamination.
This unit is the ideal selection for Murray M115-38 owners facing fuel delivery problems on the 13AC77LF058 engine platform. Because it is engineered around this specific engine code, it does not fit larger twin-cylinder engines or alternative Murray deck layouts. If your engine runs smoothly but the tractor wanders or chatters over uneven ground, your maintenance attention belongs on the steering spindles and wheel hardware.
No. 3 of 6 · DEEG
DEEG 4PCS 9040H Lawn Mower Front for Smooth Front Axle Rolling
9.2/10 Our score
Best for: Eliminating front wheel steering wobble
What the listing says
- The lawn mower front wheel bearing kit is suitable for riding lawn mower front wheels, can…
- The front wheel bearing kit for riding lawn mower includes: 2 flange bearings 9040H, 2 dust…
- Fits For husqvarna yta18542,craftsman ys4500,craftsman lt2000,husqvarna yth22v46,craftsman dys 4500,craftsman gt5000,craftsman yt4000
- Replacement craftsman lawn tractor part number 917,Compatible with Husqvarna Riding Mower front wheel bearing kits and…
- For wheels with rim size 34.925mm and axle size 19.05mm yth24v48 for husqvarna lawn mower parts…
Pros
- Sealed ball bearings reduce friction
- Complete 14 piece conversion set
- Includes dust caps and washers
Cons
- Fits specific 19.05mm axle size
The DEEG 4PCS 9040H Lawn Mower Front wheel conversion kit upgrades traditional factory-installed metal or plastic wheel bushings into smooth-rolling ball bearings. Many riding mowers rely on sleeve bushings inside the front rims that wear out over seasons of hard turns, leading to excessive wheel play, steering resistance, and uneven tire wear. This murray front wheel bearing kit replaces that worn hardware with flanged ball bearings designed to carry the front-end load smoothly across turf.
The DEEG kit arrives as a 14-piece assembly (part number F202-14) containing all the essential hardware to rebuild the front wheel hubs. Specifically, the listing includes two 9040H flange ball bearings, two 532104757 dust caps, six washers (covering 532188967, 121748X, 532121749, and 121749X), and two ring clips (812000029, 12000029). The bearings are designed specifically for mower wheels featuring a 34.925mm rim bore and a 19.05mm axle spindle diameter, making them an upgrade replacement for OEM parts 532009040 and 532124959 on Murray and compatible tractors.
This conversion kit suits tractor owners who notice front wheel wobble, stiff steering, or grinding sounds while navigating tight turns. Upgrading from friction bushings to sealed ball bearings dramatically reduces rotational drag. However, this kit only services front wheel hubs; if your tractor rolls effortlessly across the yard but fails to spin the cutting blades, your repair priority lies with the deck drive belts.
No. 4 of 6 · Ymcone
Riding Lawn Mower Deck Belt 1 for 42-Inch Cutting Decks
8.4/10 Our score
Best for: Murray 40 inch deck drive restoration
What the listing says
- Belt Application Deck ; Belt Dimension : 1/2" width x 89 1/4" length
- Replace OEM Murray 037X88, 037X88MA, 37X88, 37X88MA, 710213 ; Scotts 710213
- Fits Models Murray Lawn tractors with 42" LT rail frame 42509X92B and 42590X92A, 1997 and newer ;
- Fits Models Scotts 42" LT rail frame ending in XB, 1997-2000 .
- Our Belts Have a High Resistance to Repeated Reverse Flexing, Oil, Heat and Cracking, Prevent Breakage.
Pros
- Direct replacement for 037X62
- Oil and heat resistant construction
- Precise 86 inch length
Cons
- Too short for 42 inch mowers
Best for: Murray 42 inch deck blade drive
Pros
- Exact 89 1/4 inch length
- Resists cracking and reverse flexing
- Direct OEM 037X88 replacement
Cons
- Not compatible with 40 inch decks
The Riding Lawn Mower Deck Belt 1 by YMCONE is a drive belt engineered to transmit engine power directly to the cutting spindles on wide-frame tractors. When deck belts experience heavy use, they stretch, glaze, and crack, resulting in slipping blades and uneven grass discharge. Sourcing a dedicated murray deck belt 037×88 ensures your mower blades spin at their intended operational speed to produce an even lawn cut.
Dimensionally, this V-belt measures 1/2-inch in width by 89 1/4-inches in length (89.25 inches long by 0.5 inches wide) and weighs approximately 0.26 kilograms. The listing highlights high resistance to repeated reverse flexing, oil exposure, heat, and cracking, which helps prevent sudden belt snapping under load. It replaces OEM part numbers 037X88, 037X88MA, 37X88, 37X88MA, and 710213, as well as Scotts 710213. Maintaining proper deck belt tension ensures that clippings exit cleanly into the side discharge or into a rear bagging accessory like a craftsman grass catcher or matching collection system.
This belt is built specifically for owners operating Murray lawn tractors equipped with 42-inch LT rail frames (models 42509X92B and 42590X92A from 1997 and newer), as well as Scotts 42-inch LT rail frames ending in XB. Because of its 89 1/4-inch length, it will not properly tension on smaller 40-inch Murray decks, which need a shorter belt size.
No. 5 of 6 · Ymcone
Riding Lawn Mower Tractor Deck Belt for 40-Inch Cutting Decks
8.6/10 Our score
What the listing says
- Belt Application Deck ; Belt Dimension : 1/2" width x 86" length
- Replace OEM Murray 037X62, 037X62MA, 37X62, 37X62MA ; Toro 6738 ; Scag 483969
- Fits Models Murray lawn tractors with 40" deck, 1989 and newer ; Toro 42" Deck
- Fits Models Scag SMVR-36A and SVR36A-600FX V-Ride with 36" Deck
- Our Belts Have a High Resistance to Repeated Reverse Flexing, Oil, Heat and Cracking, Prevent Breakage.
The Riding Lawn Mower Tractor Deck Belt by YMCONE provides the precise drive tension needed for mid-sized Murray riding mowers. Deck belts endure continuous heat, dust, and tension cycles as they route around spindle pulleys and spring-loaded idlers. When the belt wears thin or slips, cutting efficiency drops drastically. Installing a replacement murray deck belt 037×62 restores positive blade engagement and eliminates mid-cut slippage.
This deck belt features an engineered 1/2-inch width and an overall length of 86 inches (86 inches long by 0.5 inches wide) with a total weight of 0.25 kilograms. Designed in black, it provides resistance to reverse flexing, engine oil, high operating heat, and surface cracking. The listing indicates that this V-belt replaces OEM numbers 037X62, 037X62MA, 37X62, and 37X62MA, while also crossing over to Toro 6738 and Scag 483969 for commercial decks.
This model is the exact match for Murray lawn tractors fitted with a 40-inch cutting deck built in 1989 and newer. Because it is 86 inches long, it cannot substitute for the longer 89 1/4-inch belt required on 42-inch Murray models. If your cutting deck functions without slipping but you notice fuel seepage around the bodywork, your maintenance focus must shift from drive belts to the fuel containment system.
No. 6 of 6 · Ezypak
7601092MA 1.4 GAL Fuel Gas Tank for Direct Replacement Fuel Storage
8.0/10 Our score
Best for: Replacing cracked leaky lawn tractor tanks
What the listing says
- For BS and Mur-ray Lawn Mower, Replaces part number: 7601092, 7601092MA,94073, 94073MA, 690294MA, 690280
- Compatible with Lawn Tractor Models: 2690892 – EBL155420H, 15.5HP 42" (2010), 2690997 – MT145380, 14.5HP 38"…
- Compatible with Lawn Tractor Models: 7800292 (385002x108C), 7800412 (EYK125380), 7800303 (425621x108D), 7800410 (ELT155420G), 7800411 (ELT155420H), 7800413…
- Compatible with Lawn Tractor Models: 7800321 (405628×151), 7800282 (425307x51A), 7800302 (425017x78B), 7800303 (425621x108C), 7800304 (425622x78C), 312006x50C,…
- Compatible with Lawn Tractor Models: 385000x68A 38", 385014x98B 38", 385015x50B 38", 385015x50C 38", 385016x78A 38", 385021x53A…
- Construction Heavy-duty construction ensures reliable storage and prevents failure during operation
Pros
- Heavy duty molded plastic body
- Includes matching threaded gas cap
- Replaces multiple OEM part numbers
Cons
- No manufacturer warranty included
The 7601092MA 1.4 GAL Fuel Gas Tank manufactured by EZYPAK offers a complete replacement solution for cracked, leaking, or degraded fuel tanks on Murray riding tractors. Over many seasons, constant engine vibration, heat cycling, and sunlight exposure can cause older plastic fuel cells to develop hairline stress cracks, especially near mounting points or the lower fuel outlet. Replacing an aging tank with a fresh murray fuel tank 7601092 prevents dangerous fuel leaks and stops debris from entering the carburetor.
This heavy-duty molded tank features a 1.4-gallon gasoline capacity, providing adequate fuel volume for standard lawn mowing duties without adding unnecessary chassis weight. The listing confirms heavy-duty construction designed to ensure reliable fuel storage and prevent seam failure during tractor operation. It arrives as a complete kit containing the tank body and a matching threaded cap, designed with standard mounting points and connections for direct installation. The tank replaces obsolete part numbers 7601092, 7601092MA, 94073, 94073MA, 690294MA, and 690280.
This fuel cell fits an extensive list of Murray lawn tractors, including 38-inch, 40-inch, and 42-inch deck variants such as model numbers 2690892, 2690997, 2690998, 2690999, 2691197-00, 2691198-00, and 7800292. The manufacturer listing notes that no warranty is included. If your tractor’s original tank remains leak-free and structurally sound, but the engine runs roughly or cuts out unexpectedly, your replacement budget is better spent on the carburetor or ignition components.
Before you choose
How to Choose the Right Murray Riding Mower Parts
Identifying the exact component required for your tractor is the most critical step when purchasing murray riding lawn mower parts online. Many Murray tractors share similar frame styles and cutting widths across different production years, but their internal sub-assemblies often rely on distinct part numbers and dimensional variations.
Begin by locating the model identification decal on your tractor chassis, which is typically found under the tilting seat, on the rear fender deck, or on the lower frame rail. This tag lists the full model number and manufacturing date code. Cross-referencing these numbers against parts diagrams will answer which parts fit my murray mower before you purchase.
When selecting deck belts, deck size and model year dictate the exact dimensions required. A 42-inch Murray deck built from 1997 onward requires an 89 1/4-inch belt (OEM 037X88), whereas a 40-inch deck requires an 86-inch belt (OEM 037X62). Choosing a belt that is too long causes belt slippage and thrown belts, while a belt that is too short puts excessive strain on spindle bearings.
For electrical components like the BlueStars ignition switch, count the physical connector terminals and verify the positions before ordering. The BlueStars switch utilizes 7 terminals across 4 positions; mismatched pinouts can prevent the starter solenoid from engaging or blow the main system fuse. Similarly, when installing front wheel bearings, verify that your mower rim has a 34.925mm bore and a 19.05mm axle spindle to ensure the DEEG conversion kit fits securely.
Questions people ask
FAQ
Which parts fit my murray mower?
To determine the exact parts that fit your Murray mower, locate the model and serial number tag on the tractor chassis, commonly positioned beneath the operator seat or on the rear frame plate. Use this complete model number to look up specific part diagrams. For engine components like the M115-38 carburetor, check the model and code stamped directly onto the engine blower housing.
Can I use universal parts on an older Murray riding lawn mower?
Some items like wheel bearings and ignition switches feature multi-brand compatibility across Murray, Craftsman, and Husqvarna models that share similar mechanical platforms. However, drive belts and molded fuel tanks require precise dimensional matches. Using an incorrect belt length or tank mounting shape can result in mechanical slippage or improper fitment.
How do I know if my Murray mower deck belt needs replacement?
Signs of a failing deck belt include visible cracking along the V-grooves, frayed outer edges, sidewall glazing, and frequent belt slippage when cutting taller grass. If your tractor blades bog down or stop spinning even when the tension lever is engaged, the belt has stretched beyond the tensioner spring capacity and requires replacement.
What is the difference between wheel bushings and the DEEG wheel bearing kit?
Factory wheel bushings are plain metal or plastic sleeves that slide directly over the axle spindle, relying on grease to minimize friction. The DEEG 9040H kit replaces those stationary sleeves with sealed ball bearings that roll freely, reducing turning effort, minimizing spindle wear, and eliminating loose front wheel wobble.
Why is terminal count important on an ignition switch?
Riding mower ignition switches control multiple circuits, including starter engagement, battery charging, headlight power, and operator safety interlocks. A switch like the BlueStars model uses 7 terminal pins across 4 key positions to route power safely. An incorrect pinout can disable safety cutoffs or prevent the engine from shutting off properly.
Proper maintenance of these core parts ensures your Murray mower delivers reliable performance across every cut. If you need a heavy-duty storage solution to organize spare mower decks and heavy attachments, our Power Rack Guide covers the safest setup options for home garages. Taking time for seasonal inspections protects your investment and minimizes unexpected downtime.
Prices, specifications and the feature lines above are read from the product listing and can change without notice. Scores are out of 10, based on listed specifications and buyer feedback; nothing on this page is written from handling the product.
