5 models in this file
Homelite 2700 PSI Pressure Washer Parts: Carbs, Hose and Manifold
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Homelite pressure washers have long been recognized for delivering steady cleaning force across suburban driveways, wooden patios, and home siding, particularly through their popular 2700 PSI gasoline-powered lineup. Over multiple seasons of demanding outdoor chores, exposure to ethanol-blended gasoline, constant vibrational stress, and mineral-laden tap water inevitably takes a heavy toll on vital mechanical assemblies. Sourcing the right homelite pressure washer parts allows equipment owners to restore peak pressure output and smooth engine starting while avoiding the steep investment of purchasing an entirely new power washer.
The replacement parts covered below span the most critical repair areas for outdoor power equipment, ranging from engine-specific fuel system overhauls to reinforced discharge lines and complete pump replacements that keep your machinery running season after season.
The line-up at a glance
Homelite Pressure Washer Parts Compared
| Model | Component Type | Primary Compatibility | Engine / Shaft Fit | Included Components |
|---|---|---|---|---|
| UT80993F Carburetor Fits for Homelite Pressure | Carburetor Kit | Homelite 2700 PSI, Craftsman 917.370602, Husky HU80722 | Honda GCV160 / GCV190 | Carburetor, air filter, fuel filter, spark plug, fuel line, 4 gaskets, insulator pad |
| Cnfaner Carburetor Carb for Homelite Pressure | Carburetor Kit | Homelite 2500/2700 PSI, UT80522B, UT80522D, UT80953A | 179CC / 180CC DJ165F | Carburetor, 3 gaskets, fuel line |
| Homelite 308835006 Pressure Washer Water Hose | High-Pressure Hose | Homelite pressure washers requiring M22 14mm connection | Not listed | 25-foot high-pressure hose with single O-ring |
| Homelite Replaces Himore Complete Outlet Manifold | Outlet Manifold Assembly | Himore pressure washer pumps with 5-screw manifold | Not listed | Unloader manifold, chemical injector assembly, outlet pipe, O-rings |
| Himore | Complete Vertical Pump | Homelite 308653052, 308653045, universal vertical models | 7/8-inch shaft, 5.5 HP minimum (Honda, Briggs, Kohler) | Vertical pump, unloader valve, thermal release valve, chemical injector, outlet tube |
No. 1 of 5 · Marsrut
UT80993F Carburetor Fits for Homelite Pressure for Honda GCV Engines
9.0/10 Our score
Best for: Honda GCV160 engine full fuel tune-ups
What the listing says
- Package 10pcs/set, including 1pc air filter, 1pc x insulation pad, 1pc x fuel filter, 1pc x spark…
- Fitment Fits for Homelite 2700 psi pressure washer model, replacing UT80993F carb.
- NOTE Please verify your model before buying to ensure a great fitment.
- High Performance Replace your old/broken carb with this one to restore the engine to being a one pull…
Pros
- Complete 10-piece rebuild kit
- Includes spark plug and air filter
- Restores quick one-pull starting
- Direct replacement for UT80993F
Cons
- Incompatible with Briggs or Subaru
- Fits Honda overhead-cam engines only
The UT80993F Carburetor Fits for Homelite Pressure is a comprehensive fuel restoration kit manufactured by Marsrut for 2700 PSI outdoor power equipment. If your engine surges under load, stalls during operation, or fails to pull fuel after prolonged seasonal storage, a compromised carburetor is almost always the root problem. Rather than just offering bare brass jets or loose gaskets, this package provides a ten-piece replacement solution containing the carburetor body, an air filter, an engine insulation pad, an inline fuel filter, a spark plug, four application gaskets, and a replacement fuel line. It directly replaces the factory UT80993F assembly on Homelite units driven by Honda small engines.
Fitment precision is vital when performing a homelite 2700 psi repair on small gas engines. This homelite ut80993 carburetor is built specifically for Homelite 2700 PSI washers, Craftsman 917.370602 mowers carrying the Honda GCV160 engine, and Husky HU80722 units equipped with Honda GCV160 or GCV190 power plants. The listing explicitly notes that this component will not fit equipment powered by Briggs & Stratton or Subaru engines. By swapping out your fouled assembly with this kit, the engine can return to a smooth one-pull start routine while maintaining consistent fuel atomization under working pressures.
This fuel assembly suits homeowners whose pressure washer relies on an authentic Honda GCV overhead-cam motor and needs a full seasonal tune-up. Because the kit packages the air filter, spark plug, and fuel filtering hardware together, you can perform preventative service and solve ignition issues in a single afternoon session. If your machine instead features an overhead valve motor branded as DJ165F, you must look past this Honda-oriented kit and choose an engine-specific alternative.
No. 2 of 5 · Cnfaner
Cnfaner Carburetor Carb for Homelite Pressure for 179cc and 180cc Engines
8.6/10 Our score
Best for: Homelite units with 179cc DJ165F engines
What the listing says
- Compatible with: Washer pump HL252300, UT80522B, UT80522D,UT80953A
- Powered by a 179CC/180CC DJ165F Engine
- Fits for Homelite 2500/2700PSI 2.3GPM Gasoline
- Center Mounting hole : 42mm-43mm,Air Intake:18mm-19mm ,Choke Hole : 24mm
- Package Included 1 Carburetor 3 Gaskets 1 Fuel Line
Pros
- Matches UT80522 series washers
- Includes fresh gaskets and line
- Precise factory bore dimensions
- Direct bolt-on carburetor replacement
Cons
- Omits tune-up air filter
- Only fits DJ165F engine blocks
The Cnfaner Carburetor Carb for Homelite Pressure provides an exact mechanical fit for pressure washers powered by 179cc and 180cc DJ165F gasoline engines. Many Homelite 2500 and 2700 PSI machines pushing 2.3 gallons per minute rely on these robust Chinese-built OHV engines rather than Japanese platforms. Over time, internal jet passages can suffer corrosion from modern fuel blends, causing hunting revs and difficult starting. This Cnfaner assembly replaces the factory fuel delivery system, shipping with three mounting gaskets and a dedicated fuel line to seal the intake tract properly against vacuum leaks.
Machined specifications on this homelite pressure washer carburetor reflect factory dimensions to ensure direct mounting without modification. The listing highlights a center mounting hole distance of 42mm to 43mm, an air intake diameter of 18mm to 19mm, and a choke hole opening of 24mm. It is designed to pair seamlessly with units running the HL252300 washer pump, including model designations UT80522B, UT80522D, and UT80953A. Those seeking a simpler, quieter cleaning routine might eventually look at electric gear like a ryobi water pressure washer, but this carburetor keeps your heavy-duty gasoline washer operating at full capacity.
This part is ideal for owners of Homelite 2700 PSI 2.3 GPM washers whose data plate lists the UT80522 series or a DJ165F power head. Because it omits extra peripherals like filters or spark plugs, it delivers focused value for users who only need to cure an erratic idle or fuel leak. If your washer is fitted with a Honda motor or needs extensive pump work, this unit will not match your engine configuration.
No. 3 of 5 · Homelite
Homelite 308835006 Pressure Washer Water Hose for Discharge Line Replacements
8.8/10 Our score
Best for: Replacing worn 25-foot pressure discharge lines
Pros
- Genuine OEM Homelite replacement
- Handles up to 3100 PSI
- Standard M22 14mm connections
- Lightweight flexible construction
Cons
- Listing notes contradictory pressure specs
- Fixed 25-foot working length
The Homelite 308835006 Pressure Washer Water Hose is a genuine original equipment manufacturer (OEM) part built to handle the intense output generated by residential power washers. High-pressure discharge hoses are exposed to constant friction, sharp concrete edges, vehicle tires, and high internal hydraulic pulsing. When a hose suffers internal braiding tears or exterior scuffing, it can burst unpredictably during use. Replacing compromised lines with this homelite 308835006 assembly ensures proper working tolerance and maintains safe operational containment.
This genuine homelite pressure washer hose measures 25 feet in length and features an M22 single O-ring by 14 mm threaded connection, making it directly compatible with standard Homelite pump outlets and wand handles. While the listing notes a nominal specification entry of 300 psi alongside 14 mm wall thickness and a four-ounce weight, the primary manufacturer rating in the title and description confirms support for up to 3,100 PSI working pressure. Constructed from durable polyurethane, polyvinyl chloride, or synthetic rubber, the black and gray hose delivers flexible maneuvering around landscaping and vehicles. For those accustomed to higher industrial flow rates like those on a greenworks power washer 3000 psi, this standard 25-foot line remains the standard factory replacement for residential Homelite frames.
This hose is the exact match for owners seeking to eliminate leaks at their discharge fittings or extend their working reach on a 2700 PSI washer. It fits directly onto pumps using standard 14 mm M22 screw collars without requiring specialized brass adapters. If your washer issues stem from low water output rather than a cracked line, your diagnostic attention should move toward the pump unloader or internal valves instead.
No. 4 of 5 · Homelite
Homelite Replaces Himore Complete Outlet Manifold for Pump Pressure Regulation
9.0/10 Our score
Best for: Complete replacement of cracked vertical pumps
What the listing says
- PRESSURE REGULATOR UNLOADER MANIFOLD
- CHEMICAL INJECTOR ASSEMBLY
Pros
- Delivers 2800 PSI water pressure
- Pre-filled with lubricating oil
- Thermal release valve included
- Fits major engine brands
Cons
- Does not fit 3/4-inch shafts
- Requires minimum 5.5 HP engine
Best for: Repairing leaking 5-screw pump unloader valves
Pros
- Includes unloader and injector
- Saves cost of full pump
- Pre-assembled with fresh O-rings
- Replaces complete discharge manifold
Cons
- Fits 5-screw pumps only
- Requires mechanical pump teardown
The Homelite Replaces Himore Complete Outlet Manifold is an all-in-one hydraulic manifold replacement built to solve water discharge failures on Homelite units equipped with Himore pumps. The pump manifold experiences intense cycling shocks every time the operator squeezes and releases the spray gun trigger. When the internal unloader valve sticks or the casting develops hairline stress cracks, the machine will fail to build pressure, bypass erratic volumes of water, or leak chemical detergent. This 13.4-ounce assembly replaces the entire exterior plumbing interface to revive pump operation.
Design details confirm that this homelite pressure washer outlet manifold is engineered for units that utilize a five-screw mounting configuration. The pre-assembled package includes the pressure regulator unloader manifold, internal O-rings, an outlet pipe, and a complete chemical injector assembly. By swapping out the entire manifold block rather than trying to track down microscopic internal seal leaks, you eliminate multiple failure points at once and avoid the frustration of repetitive pump tear-downs.
This assembly suits mechanically confident owners who want to solve pump pressure cycling, water bypass leaks, or detergent siphoning problems without the expense of a brand-new pump. It fits units utilizing the 5-screw Himore manifold pattern where the engine and internal pump pistons remain in good working order. If your pump casing is shattered from freezing or the internal drive shaft is seized, a manifold swap will not suffice, making a complete replacement pump necessary.
No. 5 of 5 · Homelite
Himore for Complete Vertical Pump Replacement
9.6/10 Our score
What the listing says
- Specs – Maximum Pressure 2800 PSI. Maximum Flow: 2.3 GPM.
- Includes – (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve &…
- This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine).
- Please note it is not recommended to run any pressure washer pump above its maximum PSI rating.
The Himore is a universal vertical replacement pump designed to restore water pressurization on machines that have suffered total hydraulic failure. Cracked internal piston chambers, water-oil emulsification, and freeze damage frequently render old pump bodies unserviceable. Rather than discarding an otherwise functional gas engine and frame, installing this complete replacement pump brings the machine back to factory performance. The pump is pre-filled with oil and comes ready to bolt onto the motor crankcase.
Engineering specifications cover broad utility across popular small gas engines. Rated for up to 2800 PSI at 2.3 GPM (with listing references noting 2.5 GPM and 3400 RPM operating speed), the pump requires an engine providing at least 5.5 horsepower. It is configured for vertical mounting with a 7/8-inch shaft diameter and features a 3-bolt pattern measuring 7 11/16 inches by 6 3/16 inches by 6 7/16 inches, with a 4-inch center-to-outer-hole distance. The unit includes a built-in unloader valve, chemical injector, thermal release valve (to be installed opposite the inlet fitting), and a 22mm outlet tube. It fits vertical crankshaft engines from Honda (GC135, GC160, GX140), Briggs & Stratton, and Kohler, but will not fit motors with 3/4-inch shafts. If you are debating between rebuilding an older gas machine or moving toward electric maintenance, checking options like a green works pressure washer can provide a helpful baseline.
This complete pump assembly is best suited for users facing catastrophic pump failures such as cracked housings, stripped drives, or severe internal piston scoring. It allows you to preserve your reliable gas motor while upgrading to a fresh 2800 PSI hydraulic system. However, if your existing pump still maintains pressure and only leaks from the discharge collar, an outlet manifold rebuild kit is a faster, more targeted repair.
Before you choose
How to Choose the Right Homelite Pressure Washer Parts
Selecting the correct components for a pressure washer repair requires understanding where mechanical issues originate. Pressure washers rely on two distinct systems operating simultaneously: an internal combustion engine that generates rotary drive power, and a positive-displacement pump that pressurizes water. When troubleshooting an idle or running issue, start with the engine. If the machine cranks but refuses to catch, surges uncontrollably, or leaks fuel behind the air cleaner, your repair involves the carburetor and fuel lines. If the engine roars smoothly at full throttle but the spray wand produces only standard garden hose pressure, the breakdown lies inside the pump or discharge fittings.
Matching fuel system parts requires identifying the specific engine installed on your Homelite frame. Homelite produced 2700 PSI machines using both Japanese Honda engines and Chinese OHV engines like the DJ165F. Check the stamped identification numbers on your engine crankcase before ordering. Installing a Honda GCV carburetor on a DJ165F engine will lead to mounting bolt misalignment and improper linkage travel. Pay close attention to throat dimensions and included accessories; full tune-up kits containing spark plugs and filters make comprehensive maintenance easier, while bare carburetors serve targeted fixes.
When selecting hydraulic components, take precise physical measurements of your old parts. For replacement pumps, shaft diameter is an absolute compatibility barrier: vertical gas engines typically feature either a 7/8-inch or 3/4-inch drive shaft, and this 2800 PSI Himore pump is engineered exclusively for 7/8-inch shafts. Mounting bolt spacing must also match your frame configuration. For outlet manifolds, verify the bolt count holding the manifold to the pump body, as 5-screw patterns differ from 3-screw or 4-screw variants.
Finally, evaluate hoses and spray accessories by thread standard and pressure tolerance. The Homelite 308835006 hose uses an M22 female coupling with a 14 mm internal nose diameter, which is the residential industry standard. Connecting an M22 15 mm fitting to a 14 mm pump outlet will cause immediate high-pressure leaks and blow out rubber O-rings. Making sure thread pitches, shaft dimensions, and engine displacements line up correctly ensures that which homelite part to buy matches your exact maintenance needs.
Questions people ask
FAQ
How do I know if my Homelite 2700 PSI washer needs a new carburetor?
A pressure washer typically requires a new carburetor if the engine fails to start despite having a strong ignition spark, stalls immediately when the choke is opened, or surges continuously at full throttle. Stale gasoline left in the float bowl during winter months evaporates and leaves behind sticky varnish that clogs microscopic metering jets. While cleaning can sometimes clear mild residue, replacing the carburetor with a dedicated kit guarantees clear passages, fresh gaskets, and proper air-fuel mixing.
What is the difference between the UT80993F and DJ165F carburetors?
The UT80993F carburetor is designed specifically for machines powered by Honda GCV160 or GCV190 engines, utilizing intake patterns and choke linkages unique to Honda power heads. In contrast, the DJ165F carburetor is built for 179cc and 180cc overhead-valve engines commonly installed on Homelite UT80522 series washers. These two carburetors feature different throat diameters, fuel inlet orientations, and center-to-center mounting hole distances, making them completely incompatible with each other.
How do I verify if the Himore replacement pump fits my engine shaft?
To verify fitment, disconnect the spark plug wire and remove the three mounting bolts securing your old pump to the engine base. Slide the pump off the vertical engine shaft and measure the shaft diameter with a digital caliper or ruler. The Himore replacement pump fits engines with a 7/8-inch diameter shaft and at least 5.5 horsepower. If your engine has a 3/4-inch shaft, this pump will not fit your machine.
Can I fix water pressure loss by replacing only the outlet manifold?
Replacing the outlet manifold can resolve pressure loss if the problem is caused by a cracked unloader valve housing, damaged internal O-rings, or a leaking chemical injector fitting. However, if the pump pistons are severely scored, internal check valves are broken, or the main crankcase has lost oil, a manifold replacement will not fix the issue. In cases of internal mechanical wear, replacing the entire pump assembly is necessary.
What type of connection does the Homelite 308835006 hose use?
The Homelite 308835006 high-pressure hose features standard M22 threaded fittings with a 14 mm internal snout and an integrated sealing O-ring. This design threads directly onto standard Homelite pump outlets and matching spray wands without needing tools. It is not compatible with quick-connect fittings unless aftermarket quick-disconnect couplers are installed.
Prices, specifications and the feature lines above are read from the product listing and can change without notice. Scores are out of 10, based on listed specifications and buyer feedback; nothing on this page is written from handling the product.
