6 models in this file
DeWalt DW735X Planer, Table and Blades Compared
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
DeWalt is recognized across the woodworking and construction trades for building rugged jobsite machinery, and its benchtop thickness planers stand among the most popular milling tools in small cabinet shops and residential garages. The company built its reputation on powerful universal motors, rigid four-column cutterhead supports, and specialized cutter designs that bridge the gap between portable jobsite equipment and heavy cast-iron stationary joinery machines. Whether squaring up rough-sawn lumber or smoothing stock for fine cabinetry, DeWalt milling equipment focuses on maximizing rigidity to eliminate snipe while delivering consistent board thickness across wide workpieces.
While the flagship DW735X thickness planer serves as the heavy-duty centerpiece for comprehensive timber dimensioning, the related lineup consists of purposeful factory accessories including the DW7351 folding table set for extended stock support and three distinct replacement blade sets engineered specifically for 13-inch two-speed planers, legacy 12-1/2-inch machines, and handheld power planers.
No. 1 of 6 · Dewalt
DeWalt Thickness Planers and Blades Compared
8.4/10 Our score
Best for: Woodworkers needing two-speed dimensioning and fine finishing
What the listing says
- Electric planer for wood has powerful 15 amp, 20,000 rpm motor (10,000 rpm cutterhead speed) handles…
- Three knife cutter head delivers 30% longer knife life and makes knife change faster and easier,…
- Two-speed gear box allows users to change feed speed to optimizing cuts per inch at 96…
- Fan-assisted chip ejection vacuums chip off of the cutter head and exhausts them out of the…
- 19-3/4 in. cast aluminum base is 2 times more rigid than a standard 10 in.
- Automatic carriage on this power planer lock reduces the movement that causes snipe without the need…
Pros
- Two-speed 96 and 179 CPI gearbox
- Three-knife cutterhead with automatic lock
- Fan-assisted active chip ejection
Cons
- Substantial benchtop footprint
- Heavy corded tool requires stationary setup
| Model | Tool Type | Blade Material | Compatible Tool | Included Components |
|---|---|---|---|---|
| DW735X | 13-inch Benchtop Planer | M2 Laminated Tool Steel | Stationary benchtop setup | Infeed/outfeed tables, extra knives, dust adapter, chute |
| DW7351 | Folding Table Accessory | Aluminum / Blend | DeWalt DW735 and DW735X | Two 13-inch folding tables, hardware kit |
| DW7352-2 | 13-inch Planer Blades (2 Sets) | Vacuum Heat-Treated M2 Steel | DeWalt DW735 and DW735X | 6 double-sided replacement knives (two packs) |
| DW6655 | 3-1/4 inch Planer Blades | High-Speed Steel | DW680K, D26676, D26677, Makita N1900 | Pair of resharpenable 3-1/4 inch knives |
| DW7332 | 12-1/2 inch Planer Blades | M2 Laminated Tool Steel | DeWalt DW733 | Set of resharpenable replacement knives |
No. 2 of 6 · Dewalt
DEWALT Thickness Planer for Two-Speed Dimensioning
8.4/10 Our score
What the listing says
- Electric planer for wood has powerful 15 amp, 20,000 rpm motor (10,000 rpm cutterhead speed) handles…
- Three knife cutter head delivers 30% longer knife life and makes knife change faster and easier,…
- Two-speed gear box allows users to change feed speed to optimizing cuts per inch at 96…
- Fan-assisted chip ejection vacuums chip off of the cutter head and exhausts them out of the…
- 19-3/4 in. cast aluminum base is 2 times more rigid than a standard 10 in.
- Automatic carriage on this power planer lock reduces the movement that causes snipe without the need…
The DEWALT Thickness Planer (DW735X) is a 13-inch benchtop powerhouse driven by a 15-amp, 20,000 RPM motor that turns its internal cutterhead at 10,000 RPM. This substantial motor package handles wide hardwoods with ease, supporting cutting depths up to 0.13 inches per pass. Built around a 19-3/4-inch cast aluminum base, this machine delivers twice the structural rigidity of standard 10-inch bases found on basic benchtop tools. An automatic carriage lock engages without manual levers, firmly anchoring the cutterhead against four precision ground posts to prevent cutterhead movement and eliminate board snipe.
A primary feature of the dewalt dw735x is its dual-speed gearbox, which allows operators to shift between two distinct feed rates to optimize cuts per inch. Setting the machine to 96 cuts per inch allows quick dimensioning and rapid material removal when rough boards need to be brought down to dimension. Shifting into the 179 cuts per inch setting slows the feed rollers while keeping the cutterhead speed constant, creating an ultra-smooth finish cut that minimizes subsequent sanding. The cutterhead holds three knives rather than the typical two, extending overall knife life by roughly 30 percent while producing clean cuts across figured grain. An integrated fan-assisted chip ejection system actively pulls wood chips away from the revolving cutterhead and propels them out through the exhaust chute, preventing debris buildup that could dent board surfaces.
The DW735X package includes essential workflow components right in the box, providing infeed and outfeed tables, a dust hose adapter, a dust-ejection chute, and an extra complete set of replacement knives. An extra-large turret depth-stop lets woodworkers dial in repeatable board thicknesses for common project standards like 1/4-inch, 1/2-inch, or 3/4-inch lumber without measuring each board. A precision material removal gauge visualizes the exact depth of cut before feeding timber into the machine. This dewalt thickness planer suits furniture makers, custom millwork builders, and serious hobbyists who need glass-smooth boards and repeatable sizing, though it represents a heavy benchtop commitment that relies on dedicated shop space rather than casual jobsite portability.
No. 3 of 6 · Dewalt
DEWALT Planer Folding Table Accessory for Board Support
9.2/10 Our score
Best for: DW735 owners needing folding board support
What the listing says
- Productivity
- Lightweight and tough aluminum construction
Pros
- Folds upright for compact shop storage
- Tough lightweight aluminum construction
- Includes complete mounting hardware kit
Cons
- Engineered strictly for DW735 series
- Adds overall length when extended
The DEWALT Planer Folding Table Accessory (DW7351) is a specialized table extension kit designed specifically for the DeWalt DW735 series thickness planers. Constructed from a durable blend of lightweight aluminum, these tables mount directly to the front and rear of the planer base to provide continuous support for long lumber as it enters and leaves the spinning cutterhead. Each table measures 13 inches long, effectively doubling the planer bed length to prevent unsupported overhang from lifting the stock into the knives.
A major design advantage of the dewalt dw7351 folding table set is its space-saving folding geometry. When the planer is idle or mounted on a mobile tool stand, both wings fold straight up against the main chassis housing. This folding action dramatically reduces the planer’s storage footprint, making it easier to maneuver around tight workshop aisles or roll under workbench shelves. Installing the included hardware kit is straightforward, and securing the mounting bolts with a tool such as a dewalt ratcheting screwdriver makes aligning the table surface flush with the center cast aluminum bed a quick task.
This table set is intended specifically for woodworkers who purchased a base DW735 unit without factory wings, or who need to replace damaged extension tables on an older unit. By supporting the entry and departure of heavy boards, these tables keep stock flat against the internal bed, directly aiding the automatic carriage lock in banishing end snipe. While they add valuable surface area to the dewalt dw735 planer, they are strictly engineered for the DW735 platform and will not mount onto smaller portable planers or competing machine frames.
No. 4 of 6 · Dewalt
DEWALT Planer Blades for DW735 Series Machines
9.4/10 Our score
Best for: Woodworkers maintaining the legacy DW733 planer
What the listing says
- Resharpenable edge of DEWALT planer blades allows for longer bit life
- For use with DW680K D26676, D26677 and Makita N1900 planers only
- Qucik-set knives for easy set up
- Durable high speed steel construction
- Great for planning wooden studs for framing or hardwoods for furniture making
Pros
- Can be resharpened multiple times
- Durable M2 laminated tool steel
- Fast and easy knife change system
Cons
- Requires dedicated sharpening equipment
- Incompatible with 13-inch DW735 cutterheads
Best for: Carpenters maintaining portable handheld power planers
Pros
- Resharpenable high-speed steel edges
- Quick-set design for rapid installation
- Compatible with multiple hand planer models
Cons
- Limited to 3-1/4-inch cutting width
- Will not fit stationary benchtop planers
Best for: DW735 users needing double-sided replacement knives
Pros
- M2 vacuum heat-treated tool steel
- Reversible double-sided cutting edges
- Includes two full sets of six knives
Cons
- Disposable design cannot be resharpened
- Incompatible with DW733 cutterheads
The DEWALT Planer Blades (DW7352-2) provide replacement cutting knives engineered exclusively for the 13-inch cutterhead found on the DW735 and DW735X planers. This specific package includes two full sets of replacement knives—six individual blades total—giving operators an immediate backup set when milling abrasive hardwoods or knotty stock. Manufactured from laminated M2 tool steel, these knives maintain an acute cutting edge significantly longer than conventional high-speed steel alternatives.
DeWalt incorporates a specialized vacuum heat-treating process alongside an advanced edge-grinding technique to make these knives resistant to chipping and nicks. The knives are double-sided, meaning each blade features two razor-sharp cutting edges. When the first side eventually dulls from extensive use, the woodworker simply unbolts the blade clamp, flips the knife 180 degrees, and reinstalls it to access a fresh factory edge. Pre-machined locator holes along the blade body drop directly over indexing pins on the planer cutterhead, guaranteeing precise alignment without the need for manual blade height gauges or trial-and-error adjustments.
Stocking dewalt dw7352 planer blades is an operational necessity for active DW735 and DW735X owners. Because the 13-inch cutterhead uses three knives spinning in balance, all three blades must be replaced or reversed at the same time to ensure uniform chip load and avoid vibration. These blades are non-resharpenable throwaway units that prioritize rapid setup and factory-calibrated straightness over manual edge dressing, catering to woodworkers who prefer fast swap-outs over spending shop time with waterstones and honing guides.
No. 5 of 6 · Dewalt
DEWALT Planer Blades for Handheld Power Planers
9.6/10 Our score
What the listing says
- M2 laminated tool steel of DEWALT planer blades stays sharper and lasts longer than conventional knife…
- Vacuum heat treating provides longer blade life before user needs to flip to the secound side
- New grinding process provides longer life with fewer nicks
- Great value with two sets of knives in each package
- Machined locator holes help users align knives on cutter head during knife change
The DEWALT Planer Blades (DW6655) are 3-1/4-inch high-speed steel knives tailored for portable handheld power planers. Built to withstand rugged framing and door-hanging environments, these blades feature a resharpenable edge that allows carpenters to hone the steel multiple times over its service life. Their quick-set knife design lets users mount and adjust the blades quickly inside the compact cutter drum of compatible portable units.
Compatibility for the dewalt dw6655 blades is strictly defined by the manufacturer for specific handheld models, including the DeWalt DW680K, D26676, and D26677 hand planers, as well as the Makita N1900. These blades are designed for aggressive material removal, such as leveling warped wooden wall studs during framing, beveling exterior door edges for clearance, and flattening uneven joints on heavy timber construction. For woodworkers who run modern cordless tools like the dewalt 20v max planer, checking blade mount compatibility is critical, as portable hand planers use varying clamp designs and blade widths.
This blade set suits finish carpenters, framers, and door installers who require a durable, resharpenable edge on portable jobsites. Because high-speed steel resists cracking when encountering hidden grit or dense lumber knots, these knives deliver dependable performance under harsh jobsite conditions. However, with a cutting width of only 3-1/4 inches, they are built exclusively for portable hand tools and cannot be used in benchtop thickness machines.
No. 6 of 6 · Dewalt
DEWALT Planer Blades for DW733 Stationary Planers
9.6/10 Our score
What the listing says
- M2 laminated tool steel of DEWALT planer blades stays sharper and lasts longer than conventional knife…
- Knives can be resharpened multiple times saving on the cost of replacing knives
- Provides fast and easy knife change to save time
The DEWALT Planer Blades (DW7332) are heavy-duty replacement knives manufactured for the classic DeWalt DW733 12-1/2-inch benchtop thickness planer. Forged from premium M2 laminated tool steel, these blades are built to exceed industry wear standards when processing dense hardwoods such as oak, maple, and walnut. Their rugged metallurgy helps the edge resist dulling during extended planing sessions across wide furniture boards.
Unlike disposable indexed knives, the dewalt dw7332 blades are designed with a substantial steel profile that can be resharpened multiple times. Woodworkers equipped with grinding jigs or wet-sharpening systems can restore these knives to a razor edge repeatedly, significantly lowering long-term operating costs across extensive timber restoration or custom carpentry projects. The knives are engineered for quick installation within the DW733 cutterhead, allowing smooth transitions when swapping out dull sets for newly ground spares.
These blades are the ideal match for carpenters, furniture builders, and restoration specialists who continue to run the reliable DW733 thickness planer. They give owners the freedom to maintain their own tooling edges rather than purchasing disposable replacements. However, because the DW733 uses a two-knife, 12-1/2-inch cutterhead architecture, the DW7332 knives will not fit the newer three-knife, 13-inch DW735 platform.
Before you choose
How to Choose the Right DeWalt Thickness Planers and Blades
Selecting the proper DeWalt planing equipment begins with identifying whether your project demands high-capacity stationary board thicknessing or localized handheld edge shaping. For comprehensive lumber processing, the DeWalt DW735X serves as the complete benchtop milling station, capable of sizing boards up to 13 inches wide. When rough boards are cut to rough dimensions using workshop tools such as a dewalt band saw 20v, feeding them through a dual-speed benchtop planer brings both faces parallel and true with minimal tearout.
Matching the correct replacement knives to your specific planer model is vital. Woodworkers frequently ask which blades fit dewalt planer models across different generations. The three blade styles in this lineup cannot be interchanged:
- DW7352-2 Knives: 13-inch double-sided, indexed knives designed strictly for the three-knife cutterhead of the DW735 and DW735X thickness planers.
- DW7332 Knives: 12-1/2-inch resharpenable knives made exclusively for the two-knife cutterhead of the legacy DW733 thickness planer.
- DW6655 Knives: 3-1/4-inch high-speed steel blades sized for handheld portable planers including the DW680K and select competitor models.
Blade maintenance philosophy represents another crucial decision point. The DW7352-2 knives feature factory locator holes that seat over cutterhead alignment pins. This system eliminates manual blade height adjustments, allowing rapid reversals or replacements, but the blades cannot be ground or resharpened once both edges are exhausted. In contrast, the DW7332 and DW6655 blades feature solid tool steel bodies that can be honed repeatedly on sharpening stones, making them an excellent choice for craftspeople who prefer servicing their own cutting edges.
Finally, consider board support and shop space constraints. A heavy benchtop planer like the DW735 benefits tremendously from extended infeed and outfeed tables. The DW7351 folding table accessory provides the necessary extension surface to prevent stock droop and eliminate snipe on long boards, yet folds upright against the machine body to keep your shop mobile and uncluttered.
Questions people ask
FAQ
Which blades fit DeWalt planer models DW735 and DW735X?
The DeWalt DW735 and DW735X thickness planers use DW7352 replacement blades (available as a single set or the DW7352-2 two-pack). These 13-inch knives feature factory-machined locator holes that align with indexing pins on the three-knife cutterhead. Neither the 12-1/2-inch DW7332 knives nor the 3-1/4-inch DW6655 blades fit these machines.
Can DW7332 blades be installed in a DW735 planer?
No, DW7332 blades cannot be installed in a DW735 planer. The DW7332 blades measure 12-1/2 inches long and are designed for the older two-knife DW733 cutterhead clamping system. The DW735 requires 13-inch reversible knives equipped with specific indexing holes.
Are DeWalt DW7352 planer blades resharpenable?
No, the DW7352 blades are not designed to be resharpened. They are precision-ground, double-sided disposable knives. When one cutting edge becomes dull or nicked, the user flips the blade over to the second factory edge. Once both edges are worn, the blades must be replaced.
What is the purpose of the two-speed gearbox on the DW735X?
The two-speed gearbox allows users to select between 96 cuts per inch and 179 cuts per inch. The 96 CPI setting advances timber faster for dimensioning rough lumber, while the 179 CPI setting slows the feed rate to deliver an ultra-smooth surface that dramatically reduces final finish sanding.
Do the DW7351 folding tables remain attached during planer storage?
Yes, the DW7351 folding tables stay bolted to the planer base and fold upright against the machine frame. This folding capability reduces the total footprint of the planer, allowing it to be tucked away on mobile stands or under shop workbenches without removing the hardware.
Prices, specifications and the feature lines above are read from the product listing and can change without notice. Scores are out of 10, based on listed specifications and buyer feedback; nothing on this page is written from handling the product.
