DeWalt Saw Guides: Rip Fences for Every Saw

The line-up at a glance

DEWALT Saw Guides Compared

From the notebook

Circular Saw Guide 381091-00 Fits for Lightweight Trim Saws

The Circular Saw Guide 381091-00 Fits is a third-party replacement part from Hugexpen that replicates the classic 381091-00 edge guide geometry. Weighing only 2.29 ounces, this guide is crafted from high speed steel to withstand abrasive contact against plywood, OSB, and dimensional lumber. The product package contains the circular saw fence bar alongside the necessary round head stop screw and spring mechanism for tensioned mounting.

This guide serves an extensive roster of DEWALT 6-1/2-inch cordless tools. The listing specifies fitment for the DW936 Type 1 and Type 2, DW936K Type 1, 2836K Type 1, DC300K Type 1, and DC310K Type 1. It also matches the popular DC390 series, including the DC390B Type 1 and Type 2, the DC390K Type 1 and Type 2, and the modern 20V line covering DCS391B across Types 1, 2, and 3, DCS391L1, DCS391M1, DCS391P1, and the DCS393 cordless circular saw.

Woodworkers and punch-list carpenters who prize pack portability will appreciate the featherweight footprint of this guide. It drops into standard saw shoes to make clean, repeatable trim cuts without carrying bulky straightedges. For trades operating larger 7-1/4-inch framing tools or wet saws, this guide will not fit the wider shoe mounting brackets.

From the notebook

DeWalt OEM N633323 Circular Saw Rip for Atomic Compact Saws

Best for: Atomic compact circular saw operators

Pros

• Genuine DEWALT OEM part
• Exact fit for DCS571 series
• Maintains compact saw profile

Cons

• Only fits DCS571 saws
• Hardware inclusion not listed

The DeWalt OEM N633323 Circular Saw Rip is a genuine factory replacement fence manufactured directly by DEWALT under part number N633323. Unlike general full-sized circular saw fences, this model is built specifically for compact sub-compact cutting tools. Its proportions and attachment bar match the dedicated mounting slot found on the DEWALT DCS571 series of 4-1/2-inch cordless circular saws.

The listing highlights this unit as a brand new, genuine OEM component engineered to restore factory ripping capabilities to both the DCS571B bare tool and the DCS571P1 kitted circular saw. Because compact saws feature a streamlined motor housing and reduced shoe width, standard aftermarket fences designed for 6-1/2-inch or 7-1/4-inch saws simply do not clamp correctly. This genuine part ensures the proper offset distance and shoe engagement needed to rip thin sheet materials, soffits, and drywall cleanly on site.

This saw guide is the clear choice for electricians, plumbers, and finish installers who rely on the small DCS571 saw for tight-space cuts and overhead installations. Just as mobile workers pack lightweight specialty gear like a dewalt snow shovel for winter site access, having a compact-specific rip fence keeps smaller cutting kits completely self-contained. It is not compatible with standard 6-1/2-inch or 7-1/4-inch circular saws.

From the notebook

DEWALT N596595 Tile Saw Guide Replacement for Wet Tile Cutters

Best for: Contractors servicing wet tile saws

Pros

• Genuine DEWALT replacement component
• Durable wet-cutting construction
• Restores proper guide alignment

Cons

• Fits only D24000R and D36000
• Not for circular saws

The DEWALT N596595 Tile Saw Guide Replacement is an authentic OEM replacement component engineered for DEWALT wet tile saws. Rather than clamping to the shoe of a handheld circular saw, this 1.21-pound structural component functions within the integrated table guide rail system of heavy-duty wet cutting equipment. It is fabricated from durable materials designed for repeated exposure to water, abrasive tile slurry, and continuous commercial cutting under standard operating conditions.

DEWALT lists compatibility specifically for the D24000R and D36000 wet tile saw models requiring replacement part number N596595. Over extended commercial usage, slurry buildup and continuous sliding can wear down factory guide parts, causing slop or tracking errors during diagonal and rip cuts. Installing this component restores proper mechanical alignment and positioning, ensuring smooth cart glide and accurate tile sizing.

This part is designed specifically for tile contractors and masonry professionals doing repair and maintenance on high-capacity wet saws. It holds no utility for woodworking circular saws or framing tools, serving strictly as a precision replacement component to keep wet cutting stations running true.

Before you choose

How to Choose the Right DeWalt Saw Guide

Selecting the correct saw guide starts with identifying your specific DEWALT saw model and shoe geometry. Handheld circular saws feature distinct mounting slots that vary significantly between compact 4-1/2-inch trim saws, standard 6-1/2-inch cordless models, 7-1/4-inch sidewinders, and rear-handle worm drives. Trying to force a guide into an incompatible shoe can result in loose tracking, skewed cuts, or binding against the blade guard.

When selecting a guide for standard circular saws, review the following key factors before ordering:

• Saw Shoe Form Factor: Match the guide to your saw category. Compact 4-1/2-inch saws require the dedicated DeWalt OEM N633323, while 6-1/2-inch models like the DCS391 utilize the 381091-00 profile offered by Yinony and Hugexpen. Full-sized 7-1/4-inch circular saws like the DWE575 need the DW3278 format.
• Ripping Capacity and Reach: Standard single-bar fences are optimized for narrow cuts like edge trimming and ripping furring strips. For wide sheet cutting or framing stair treads up to 14-1/2 inches, the dual-port folding DeWalt DWS5100 provides the necessary width and rigidity on DCS577 and DWS535 saws.
• OEM vs. Compatible Replacements: Authentic DEWALT parts like the DWS5100, N633323, and N596595 ensure exact factory fitment and original materials. High-quality aftermarket replacements, such as those from Yinony or uhzz, offer functional geometry and include mounting screws to get older tools back into service.
• Tool Category: Keep masonry equipment separated from woodworking tools. Wet tile saws like the D24000R require specialized tracking components like the DEWALT N596595 to withstand water slurry, which cannot be used on handheld timber saws.

Just as tradespeople balance portability when selecting specialty tools like a dewalt polesaw chainsaw 20v, picking the right guide means matching the attachment to your primary transport and cutting workflow. A compact single-bar fence easily rides inside a standard contractor bag, while larger dual-port folding guides offer maximum versatility for framing trucks.

Questions people ask

FAQ

Will a 381091-00 rip fence fit my 7-1/4-inch DEWALT circular saw?

No, the 381091-00 rip fence is designed specifically for DEWALT 6-1/2-inch cordless circular saws, such as the DCS391, DC390, and DW936 series. Full-sized 7-1/4-inch saws require the DW3278 rip fence or the dual-port DWS5100 guide, as their shoe brackets feature wider slot spacing and different bar widths.

Do these saw guides include mounting screws and springs?

Most single-bar replacement circular saw guides, including the 381091-00 models from Yinony and Hugexpen as well as the DW3278 from uhzz, include a round head stop screw and tension spring in the package. The DeWalt DWS5100 includes two installation screws for its dual-port mounts. The listing for the DeWalt OEM N633323 does not specify whether mounting screws are included.

What is the benefit of the dual-port DeWalt DWS5100 guide over single-bar fences?

The DWS5100 connects through two separate shoe ports, eliminating fence flex over longer rip distances. It also delivers significantly wider ripping capacity, supporting up to 12 inches on the left side and 14-1/2 inches on the right side with laser-etched markings, whereas standard single-bar fences are limited to narrower rips.

Can I use the DEWALT N596595 guide on a circular saw?

No, the DEWALT N596595 is a dedicated replacement guide component specifically designed for DEWALT D24000R and D36000 wet tile saws. It integrates into the sliding rail and cart assembly of those tile cutters and is not compatible with any handheld wood-cutting circular saw.

How do I secure a circular saw guide to prevent wandering during cuts?

Insert the guide bar into the front slot of the saw shoe, adjust the edge bar to your desired cut width using the etched scale or a tape measure, and tighten the stop screw firmly against the spring. Ensure the fence face sits parallel to the blade before making your cut to prevent binding or wandering along the stock edge.