5 models in this file
Keeping a Craftsman Snow Blower Running: Parts That Fit
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Craftsman snow blowers have long served homeowners and rural property managers as dependable workhorses during harsh winter storms. Maintaining an older or heavily used machine often comes down to tracking down compatible third-party components rather than relying solely on scarce original factory stock. Sourcing dependable hardware ensures that an unexpected freeze or heavy snowfall does not leave a long rural driveway completely blocked.
The replacement components examined here target the most frequent mechanical failure points on these winter machines, spanning protective skid shoes and pull starters to replacement rubber augers, sacrificial shear pins, and structural attachment brackets.
The line-up at a glance
Craftsman Snow Blower Parts Compared
| Model | Component Type | Primary Material | Package Contents |
|---|---|---|---|
| Universal Roller Skid Snow Thrower Shoes | Skid shoes | Polyurethane and nylon | 2 skid shoes with hardware |
| YAMAKATO Pull Start 951-12418 951-12408 951-12127 | Recoil starter assembly | Nylon 66 rope and metal housing | 1 recoil starter, 1 spare cord, starter cup, mounting nuts |
| 302565MA 327072MA Snow Thrower Paddle & | Auger paddles and hardware | Heavy-duty rubber and steel | 4 half-round paddles, 4 square paddles, 90-piece hardware set |
| YAMAKATO 6PCS 738-04124A 714-04040 Shear | Shear and cotter pins | SAE Gr.2 steel | 6 shear pins and 6 cotter pins |
| 64451 LH & 64452 RH Snow | Front hanger brackets | Cold-resistant metal | 1 left bracket and 1 right bracket |
No. 1 of 5 · Huthbrother
Universal Roller Skid Snow Thrower Shoes for Ground Clearance Control
4.1 Amazon buyer average
Best for: Driveway scratch prevention on pavers and concrete
What the listing says
- Suitable Size Model 2-3/4" slot and 3" bolt centers.Snow Blower Skid Shoes.
- Wide Range of Application: Craftsman, MTD, Cub Cadet A-riens most 2-stage and 3-stage snow Thrower Snowblowers.
- Compatible with Craftsman, Troy Bilt, Cub Cadet, A-riens, MTD, MTD Pro, Yard Machines, Husqvarna and Yard-Man.
- Durable Materials 490-241-0038 Snow Blower Skid Shoes are made of durable polyurethane material, which is durable, cold resistant…
- NOTE Due to different batches of product, the hole distance may vary slightly.
- Product Characteristics The Universal Roller Skid Snow Thrower Shoes improves the operability of the snowblower, effectively protects driveways,…
Pros
- Durable polyurethane construction
- Protects decorative ground surfaces
- Includes installation hardware
Cons
- May require drilling for non-standard hole spacing
The Universal Roller Skid Snow Thrower Shoes provide a rolling buffer between the bottom of the auger housing and the clearing surface. Manufactured by Huthbrother, these shoes are engineered from cold-resistant polyurethane, making them considerably gentler on delicate driveways, stamped concrete, and porch pavers than conventional steel skids. By rolling smoothly across textured surfaces, they prevent surface gouging while keeping the scraper bar positioned at the exact elevation required to scoop snow without catching uneven stones.
These craftsman snow blower skid shoes feature a 2-3/4 inch slot spacing designed to accommodate 3-inch bolt center layouts on most two-stage and three-stage snow throwers. The manufacturer explicitly notes that because slight variances occur between factory production runs, users can easily drill new mounting holes through the tough nylon body to match the specific hole patterns on their Craftsman or companion MTD-built blowers. The package contains a pair of black roller shoes along with the required mounting hardware, delivering an immediate mechanical upgrade for older steel units that have ground down their lower flanges.
For cabin stewards who maintain properties with rustic stone pathways or expensive composite decking, these roller skids solve the scraping problem associated with stamped sheet-metal shoes. While clearing open drives with a heavy two-stage machine, operators seeking light steps or ramp cleanup often turn to an ego snow shovel to avoid rolling big machinery across narrow access points. For the primary driveway, these roller skids keep the heavy auger balanced and traveling smoothly through dense drifts.
No. 2 of 5 · Yamakato
YAMAKATO Pull Start 951-12418 951-12408 951-12127 for Engine Ignition Reliability
4.5 Amazon buyer average
Best for: Replacing snapped pull cords on 208cc engines
What the listing says
- Replace part number: 751-12418, 951-12408, 951-12418, 951-12127, 951-14151 951-10658 751-14151 751-10658 For MTD Craftman Yard Machines…
- For MTD Craftsman… 21AB45M5004 21AB45M8704 21B-39M5004 21B-39M8704 21A-39M5004 21A-39M8704 21AB45M8704 21A-39M5897 21A-39M8897 21A-34M5099 (247.29934) 21AB40M1099 (247.29930)…
- For MTD Troy Bilt… 24BG57M1783 24BG55M1706 24BG57M3004 24BG57M3099 (247.77661) 24BG57M1799 (247.776611) 24BG57M1799 (247.
- For Troy Bilt Squall 2100, Storm 2410 2420 2620 2690 2690XP 5024; For Remington Squall 2100…
- Used on MTD / MTD Pro / Craftsman / Yard Machine / Bolens / Huskee 208cc…
- Comes with 1 recoil pull starter, 1 extra pull cord, a pully cup,and mounting nuts in…
Pros
- Includes starter cup and spare pull cord
- Durable nylon 66 pull rope
- Fits multiple 208cc engine models
Cons
- Only fits select 208cc engine configurations
The YAMAKATO Pull Start 951-12418 951-12408 951-12127 addresses one of the most frustrating sub-zero failures: a snapped recoil cord or a cracked starter spring. This replacement craftsman snow blower recoil starter is tailored for the widely distributed 208cc engines found across Craftsman, MTD, Troy-Bilt, and Cub Cadet snow equipment. Sourced as a direct replacement for part numbers such as 751-12418, 951-12408, 951-12127, and 951-14151, this unit provides a complete manual ignition overhaul in a single bolt-on package.
Included with the assembly is an original equipment style nylon 66 pull cord, an auxiliary starter cup to ensure clean engagement with the engine flywheel, an extra pull cord for future emergencies, and replacement mounting nuts. The assembly fits popular Craftsman machine series including model prefixes 247.29934, 247.29930, and 247.29932, alongside Troy-Bilt Storm series units. The listing highlights compatibility with gasoline engines throwing snow up to 30 feet at an 8-inch clearing depth, ensuring the pull mechanism can withstand repeated aggressive pulls in deep snow conditions.
Cabin caretakers and property owners preparing for remote winter stays cannot afford to be stranded by a snapped cord when electrical outlets are unavailable for electric starters. While small battery-powered options like a snow blower shovel dewalt handle quick stoop clearing, the full-size 208cc gas machine does the heavy drift busting. Stashing this complete recoil assembly on a workshop shelf ensures that a broken pull string can be resolved with four nuts rather than an aborted snow clearing session.
No. 3 of 5 · Huthbrother
302565MA 327072MA Snow Thrower Paddle & for Single-Stage Rubber Replacement
4.6 Amazon buyer average
Best for: Single-stage paddle replacement on clearing augers
What the listing says
- Replacement part number : CRAFTSMAN 302565, 302565ma, 35992MA, 335992, MURRAY 1687312SM, 302565MA, 302565, 1687312, 1687312YP
- Replaces Paddles For Auger 327072MA, 1501981MA 1501981, 327072 and others, S-tens 730-340, N-OMA 20 snowthrower model C2030-010, SNAPPER ESS50220E and…
- Suite includes: (4) Half-Round Snowblower Paddles (6 Mount Holes Each), (4) Square Two specifications Snowblower Paddles…
- We Include 2 Different Style Center Rectangles So This Set Will Fit All Three Sizes!!!
- Originally had rivets to hold paddles on.
Pros
- Full 90-piece nut and bolt hardware set
- Includes two center rectangle paddle styles
- Replaces hard-to-service factory rivets
Cons
- Requires drilling out original factory rivets
Single-stage snow throwers rely on flexible rubber paddles to scoop snow off the pavement and fling it directly through the discharge chute. The 302565MA 327072MA Snow Thrower Paddle & hardware kit from Huthbrother replaces worn, cracked, or shredded auger edges across 20-inch, 21-inch, and 22-inch single-stage Craftsman and Murray snow clearing equipment. When original paddles wear down past their wear indicators, snow discharge distance drops significantly and the machine starts leaving a heavy, compacted film of snow behind.
This comprehensive kit includes four half-round paddles featuring six mounting holes each, alongside four square paddles with three mounting holes. To ensure compatibility across different deck widths, the package incorporates two distinct styles of center rectangular paddles. Critically, Huthbrother includes a complete 90-piece hardware suite containing thirty bolts, thirty nylon-insert locknuts, and thirty wide washers. This hardware selection allows owners to drill out the stubborn factory rivets that originally held the old rubbers in place, replacing them with a serviceable nut-and-bolt arrangement that simplifies future maintenance.
Homeowners maintaining smooth, flat asphalt paths will find that this craftsman snow thrower paddle kit restores original scraping performance without the expense of replacing the entire internal auger shaft. While compact electric throwers like a snow joe snow blower serve well for small suburban walkways, an older gas-powered Craftsman single-stage blower equipped with fresh rubber paddles clears down to bare blacktop across medium driveways with minimal effort.
No. 4 of 5 · Yamakato
YAMAKATO 6PCS 738-04124A 714-04040 Shear for Auger Drive Protection
4.0 Amazon buyer average
Best for: Quick emergency field repairs after auger jams
What the listing says
- Model Number 6 pcs Cotter Pin 714-04040 and 6 pcs Shear Pin 738-04124
- Corrosion-resistant SAE Gr.2 steel shear bolts that protect your snowblower's auger by shearing under impact from obstructions.
- Fit for below models: Compatible with Cub Cad et Craftsman Troy Bilt MTD Yard Man Yard…
- Dimension Pin is 1/4" diameter, 1-5/8" overall length, 1-1/2" to the head.
- Please consult your machine manual before ordering to make sure the replacement parts are correct.If you…
Pros
- Corrosion-resistant SAE Gr.2 steel
- Includes matching cotter pins
- Six complete replacement pairs
Cons
- Sized strictly for quarter-inch shear pin holes
Hidden obstructions such as frozen gravel chunks, discarded ice chunks, and buried branches present an immediate hazard to a snow blower gearbox. The YAMAKATO 6PCS 738-04124A 714-04040 Shear pin set is precision-engineered to act as a mechanical circuit breaker, snapping intentionally when the spinning auger encounters an immovable object. Manufactured from corrosion-resistant SAE Grade 2 steel, these craftsman snow blower shear pins provide predictable yield strength that shields the expensive brass worm gear inside the auger gearbox from catastrophic impact damage.
The kit contains six model 738-04124A shear pins and six model 714-04040 cotter pins, yielding twelve pieces total. Each pin measures 1/4 inch in outer diameter with a total overall length of 1-5/8 inches, measuring 1-1/2 inches from beneath the head to the tip. The cotter pin retention hole is located 1-1/8 inches down from the head. This geometry fits standard two-stage blowers across Craftsman, Troy-Bilt, MTD, Yard Machines, Bolens, and Cub Cadet lines.
Keeping spare shear hardware tucked in a pocket or zip-tied to the blower handle is fundamental winter procedure. When an auger hits an unseen obstacle at the edge of a rural drive, replacing a broken pin takes only two minutes in the freezing cold, provided the operator has spares on hand. Relying on an improvised hardware-store grade bolt instead of genuine Grade 2 shear pins risks transmitting shock loads directly into the transmission, resulting in cracked housings and ruined drives.
No. 5 of 5 · Edd Torq
64451 LH & 64452 RH Snow for Tractor Snow Thrower Suspension
4.4 Amazon buyer average
Best for: Mounting snow thrower attachments to lawn tractors
What the listing says
- Replace Part Number Left Front Hanger Bracket 64451 A64451 64451BL1; Right Front Hanger Bracket 64452 A64452 64452BL1
- Compatibility Compatible with Craftsman Agri-Fab Snow Blower
- Package Include 1 Set Snow Blower Thrower Attachment Front Hanger Bracket ( Left & Right )
- Durable construction: Made from high-quality materials, it features a robust structure that is wear-resistant and capable…
- Easy to install with no complicated steps required, simple to replace and maintain, saving you time
Pros
- Complete left and right bracket pair
- Cold-weather wear-resistant construction
- Straightforward bolt-on installation
Cons
- Mounting bolts not listed in package
The 64451 LH & 64452 RH Snow blower thrower attachment front hanger bracket set manufactured by EddTorq replaces worn or deformed structural mounts on garden tractor setups. Designed specifically for Craftsman and Agri-Fab tractor-mounted snow attachments, these heavy-duty brackets bear the dynamic forces generated when an auxiliary thrower housing is lifted, lowered, and pushed through deep, wet snowbanks.
This package contains a matched left-hand bracket (replacing part numbers 64451, A64451, and 64451BL1) and right-hand bracket (replacing numbers 64452, A64452, and 64452BL1). Built from heavy-gauge structural metal coated in a black finish, these components are engineered to resist low-temperature embrittlement, sustained vibration, and metal fatigue. Because tractor attachments carry substantial front-end weight, bent or cracked hanger brackets lead to auger misalignment, belt slipping, and uneven scraping along the driveway surface.
Installing these brackets restores proper operational geometry before the first major freeze forces tractor conversion. For properties where sprawling acreages require heavy tractor clearing alongside narrow walkway sweeping with a black and decker cordless snow blower, keeping the tractor attachment properly aligned ensures the big blade cuts cleanly across wide expanses without bottoming out.
Before you choose
How to Choose the Right Craftsman Snow Blower Parts
Selecting suitable craftsman snow blower parts requires identifying the underlying manufacturing platform of your machine. Craftsman snow equipment has historically been built by several different manufacturing partners, predominantly MTD, Murray, and Agri-Fab. Determining whether your machine uses a model number beginning with 247 (indicating MTD construction) or 536 (indicating Western Tool or Murray construction) is the essential starting point for confirming which parts fit craftsman snow blower units.
- Engine Displacement and Starter Matching: Recoil starters are tied directly to the engine block rather than the snow blower chassis. The YAMAKATO recoil assembly targets 208cc overhead valve engines common on modern units. Check your engine valve cover or block stamping for displacement before ordering pull-start hardware.
- Wear Items versus Failsafe Hardware: Rubber auger paddles and skid shoes represent scheduled wear items that degrade steadily across clearing seasons. In contrast, shear pins are sacrificial failsafes designed to snap without warning. A comprehensive maintenance kit should balance long-term replacement wear parts with an immediate reserve of emergency fasteners.
- Fastener Specifications and Modification: Ground-contact components like polyurethane skid shoes may require subtle customization. Because hole spacings can drift slightly between factory stamping dies, picking replacement shoes molded from drillable polyurethane or nylon allows you to adjust bolt slots without sacrificing structural integrity.
- Hardware Upgrades During Servicing: Older single-stage augers were frequently assembled with factory steel rivets. When overhauling worn auger rubbers, choose kits that supply replacement threaded bolts, nylon-insert locknuts, and large backing washers to eliminate the need for specialized riveting tools and streamline future repairs.
Questions people ask
FAQ
Which parts fit craftsman snow blower models made by different manufacturers?
Because Craftsman units have been manufactured by partners like MTD, Murray, and Husqvarna over different decades, fitment depends strictly on the model prefix and part numbers. Units carrying a 247 prefix share direct part compatibility with MTD, Troy-Bilt, and Cub Cadet machines, allowing the use of standardized 208cc recoils, 1/4-inch shear pins, and standard skid shoes. Units built by Murray or Agri-Fab require checking specialized legacy part diagrams.
How do craftsman snow blower shear pins protect the auger transmission?
Shear pins connect the rotating auger spirals to the internal drive shaft. When an auger strikes an immovable object such as a curb edge or hidden piece of ice, the Grade 2 steel pin shears cleanly across its diameter. This disconnects the jammed auger from the rotating shaft instantly, preventing rotational torque from shattering the internal brass gears within the central gearcase.
Can craftsman snow blower skid shoes be modified if the bolt holes do not align?
Yes, composite and polyurethane skid shoes like the Huthbrother roller skids can be drilled to accommodate unique bolt center dimensions. If the factory slot spacing does not match your auger housing, clamping the shoe firmly and boring an additional hole matching your machine specs provides a secure, reliable mount without compromising cold-weather durability.
When should craftsman snow thrower paddle assemblies be replaced on single-stage machines?
Single-stage rubber paddles must be replaced when the rubber has worn down close to the metal mounting plate or when the outer edges exhibit deep cracking and chunking. If the machine begins pushing snow forward rather than pulling it inside the chute, or leaves an inch of hard-packed snow across smooth pavement, the paddles have lost their wiping contact and require immediate replacement.
What tools are required to replace craftsman snow blower repair parts in the middle of winter?
Most field repairs demand only basic hand tools. Replacing shear pins requires needle-nose pliers for the cotter pin and a pair of 7/16-inch or 1/2-inch wrenches. Swapping a recoil assembly typically requires an 8mm or 10mm socket set. If you are drilling out factory rivets on a single-stage auger paddle replacement, an electric drill and high-speed steel bit are required prior to bolting on the new hardware.
Prices, specifications and the feature lines above are read from the product listing and can change without notice. Every score is the average rating Amazon buyers left for that item; nothing on this page is written from handling the product.
